GAO Tek’s Integrated UHF RFID Reader

The integrated UHF RFID reader series offers an enterprise level.





The integrated UHF RFID reader series offers an enterprise level, high performance yet low cost EPC Gen 2 RFID solution. It is ideal for commercial and industrial environments that require unobtrusive deployments with a minimum of cabling, readers and antennas. This reader supports thread safe local applications and remote applications on Windows.

Key Features

  • Cisco-certified DHCP and DNS-based configuration and firmware management, TCP/IP networking stack
  • Separate read and write levels, configurable from 5 dBm to 30 dBm (1W), ±1.0 dBm accuracy
  • 1 LED indicator; Opt-isolated GPIOs: 4 inputs and 4 outputs
  • SSL/SSH-based security
  • RoHS compliant

Technical Specifications

Tag /transponder protocol
RFID Air-interface protocol EPC Global Gen 2 (ISO 18000-6C) with Anti-collision, DRM and advanced anti-jamming
RF interface
Antenna connector 1 RP TNC connector to support external mono-static antenna in addition to integrated antenna.
Frequency Hop table with up to 62 entries, configurable in 50kHz steps, accommodating the following ranges: FCC 902 to 928 MHz; ETSI 865.6 to 867.6 MHz (planned); MIC 910 to 914 MHz (planned)
Data/ control interface
Connectors 10/100 Base-T Ethernet interface, serial RS232 port; 12-pin screw terminal connector
Wireless 802.11 b/g (optional) WEP 40-BIT AND 104-BIT KEYS; WPA and WPA2 with TKIP and AES algorithms with pre-shared keys or EAP-TLS
Power over Ethernet Power over Ethernet 802.3af in both modes A and B (supports 100 m cable)
External DC power(optional) 10 to 30 V DC supply voltage. Maximum DC power: 15 W
Operating temp -20 °C to 60 °C
Storage temp -40 °C to 85 °C
Humidity Relative humidity 0 to 90% non-condensing
Processor Intel IXP420 network processor
DRAM memory 64 MB
Flash memory 32 MB
Tag buffer 65,000 tags
Mercury OS features
Web based applications Configuration and monitoring from a web browser; HTTP/HTTPS
Protocol Reader Query Language (RQL) and Mercury OS CAPI
Max tag read rate Over 190 tags/second
Max tag read distance Over 30 ft (9 m) with 6 dBi antenna (36 dBm EIRP)
Max EPC ID length 256 bits
Regulatory FCC 47 CFR Ch.1 Part15; industries Canada RSS-210 ETSI EN 302 208 V1.1.1 and V1.2.1 (planned); ETSI EN 300 220 V2.1.1 (planned)
Dimensions 26 cm (L) × 26 cm (W) × 7.6 cm (H)


There are no reviews yet.

Be the first to review “GAO Tek’s Integrated UHF RFID Reader”

Your email address will not be published. Required fields are marked *