GAOTek Handheld LCR Meter

GAOTek handheld LCR meter adopts the ultra-low dissipation design and high density SMD assembly techniques and can simultaneously display primary and secondary parameters using backlit LCD display.

SKU: GAOTek-LCR-226 Category:
Description

Description

Technical Specifications:

Inal
Measurement Speed 10 meas/sec (Fast), 5meas/sec (Medium), 2 meas/sec (Slow)
Correction Short, Open
Tolerance Mode 1%, 5%, 10%, 20%
Input protection fuse 0.1 A or 250 V
Interface Mini-USB (virtual serial port)
Signal Frequency 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
Test Signal Level 0.6 VRMS
Output Impedance 100 Ω
Display LCD primary-secondary dual display
Backlight Battery supply: when backlight is on, luminance is reduced by half 15s later and automatically turned off 30 s later

Powered by adapter: backlight is on until manually turned off

Readings Max. counts of primary parameter: 40,000; D or Q or θ Min. resolution of Secondary parameter: 0.0001
Basic Accuracy 0.1%
Measurement Display Range L 0.001 uH to 1000.0 H
C 0.001 pF to 20.00 mF
R or Z 0.0001 W to 10.00 MW
ESR 0.0000 W to 999.9 W, resolution: 0.0001 W
D 0.00 to 9.99, resolution: 0.0001
Q 0.00 to 9999, resolution: 0.0001
Ɵ -179.9° to 179.9°, resolution: 0.01°
Power Supply
Battery Model 7.2 V Ni-MH 600 mAH rechargeable battery
AC Adapter Input: 220 V (1 ±10%), 50 Hz (1 ±5%); Output: 9 V DC
Operating Current Max.: 28 mA, Typical: 25 mA (1 kHz ,100 Ω load)
Standby (Power off) Current Max.: 2 μA
Battery Life 24 hrs (Typical), based on backlight off and new fully charged Ni-MH battery
Charge Time and Current Continuous charge time: Max. 80 min Charging current: Max. 150 mA
Auto Power Off 5 min, 15 min, 30 min, 60 min, OFF available
Battery Capacity indicate Real-time display on LCD
General
Operation Condition Temperature 32 °F to 104 °F (0 °C to 40 °C)
Relative Humidity ≤90% RH
Dimensions (H x W x D) 7.59 in x 3.62 in x 1.73 in (193 mm x 92 mm x 44 mm)
Weight 1.01 lb (460 g)