Click to enlarge
GAOTek LCR Capacitance, Resistance And Inductance Detector
Back to products
GAOTek Portable Digital Coating Thickness Tester

GAOTek LCR Meter Good Quality Inductance

GAOTek LCR Meter good quality inductance is a multi-functional component tester for testing all kinds of electronic components.

Add to quote
SKU: GAOTek-LCR-194 Category:
Description

Description

Overview

GAOTek LCR Meter good quality inductance is a multi-functional component tester for testing all kinds of electronic components. The most popular 4.3 in (10.92 cm) LCD display is used; it is more intuitive and more comfortable for users to read test results. It is an impedance tester with high speed, wide measurement range and five bits’ testing resolution, which can meet the requirements of production line quality assurance, purchase inspection and laboratory measurement.

Features

  • 3 in (10.92 cm) LCD, more intuitive
  • 50 Hz to 100 kHz,37 typical frequencies
  • Basic measurement accuracy is 0.05 %, the maximum test speed can reach 40 times or Sec.
  • Different kinds of signal sources output impedance such as 30 Ω,100 Ω
  • Built-in comparator, four files sorting and file count function
  • 50 internal setting file groups expand with U disk for test files
  • Upgrade instrument software via USB HOST
  • The file systems with format FAT 16, FAT 32 are supported
  • Standard RS232C, HANDLER, USB HOST, optional GPIB

 

Technical specifications

Operating temperature & humidity 32 °F to 104 °F (0 °C to 40 °C), 90 % RH
Voltage 100 V to 120 V AC or 198 V to 242 V AC
Frequency 47.5 Hz to 63 Hz
Power loss ≤ 30 VA
Test frequency 50 Hz, 60 Hz, 100 Hz, 120 Hz, 1 KHz, 10 KHz, 20 KHz, 40 KHz, 50 KHz, 100 KHz
Basic measurement accuracy 0.05 % (UC2756), 0.1 % (UC2756B)
Equivalent circuit Series, parallel
Range method Automatic, hold, manual selection
Trigger mode Internal, manual, external, bus
Measurement speed (≥ 1 kHz) Fast speed: 30 times or Sec at most, medium speed: 11 times or Sec, slow speed: 3 times or Sec
Delay time 0 s to 60 s, step 1 ms
Correction function Open circuit or short circuit or load
Test end configuration Five ends
Display mode Direct reading, Δ, Δ %, V / I (Measured voltage or current monitor)
Display 5 bits resolution, 4.3 – inch LCD display
Test signal frequency 50 Hz to 100 kHz
Output impedance Optional 30 Ω, 100 Ω
Test signal level Normal: 0.1 V, 0.3 V, 1 V
|Z|, R 0.01 mΩ to 99.99 MΩ
L 0.0001 µH to 999.99 H
Q 0.0001 to 99999
θ (DEG) -179.99 º to 179.99 º
θ (RAD) -3.14 to 3.14
Δ% -999.99 % to 999.99 %
Comparator function Four – files sorting function
Memory 100 groups of internal setting files for storage or call, external 500 groups
Interface Standard RS232C, USB HOST, optional GPIB, HANDLER
Weight About 5.51 lb (2.5 kg)