Description
Overview
GAOTek LCR Tester Digital AMP is a multifunctional component tester used to test various electronic components. The 4.3 in LCD display is the current most popular, users can read the test results more intuitively, more comfortably. It is a kind of high-speed impedance measurement, wide measurement range and 5-bit resolution test, which can meet the quality control on production line, incoming inspection and lab measurement.
Features
- 3-inch LCD display, more intuitive and clearer
- 100 Hz to 50 kHz, 10 typical frequencies
- 30-ohm, 100 ohms to two different signal source output impedance
- Built in 4 comparator, file sorting and counting function
- In the 100 set of internal documents, U disk expansion multiple test file or call
- Built in 2V DC bias voltage
- By USB HOST to realize the instrument software version upgrade and update
- Can support the format of FAT16 file system, FAT32
- HANDLER, USB HOST, optional GPIB
Technical Specifications
| LCR Test | Z| |Y|,>|, C, L, X, B, R, G, D, Q. |
| Test Frequency | 50 Hz, 60 Hz, 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 40 kHz, 50 kHz, 100 kHz, a total of 10 |
| Basic Measurement Accuracy | 0.05 % |
| Equivalent Circuit | in series and parallel |
| Mathematical Functions | absolute deviation, percentage deviation of |
| Range | automatically, manually select the |
| Trigger Mode | internal, external, manual, bus |
| Measuring Speed | fast: the fastest 40 times per second, the speed: 11 times / sec, slow speed: 3 times / sec |
| The Average Number Of | 1 255 |
| Delay Time | 0 60 s to 1 ms, step |
| Calibration Function | open / short / load |
| Test Terminal Configuration | five |
| Display | reading, Delta, delta %, V/I (the measured voltage / current monitor) |
| Display | 5 resolutions, 4.3-inch LCD display |
| Test Signal Frequency | > 50 Hz 100 kHz |
| Output Impedance | 30-ohm, 100 ohms can choose |
| Test Signal | normal: 0.1 V, 0.3 V, 1 V, accuracy: 10 % |
Reviews
There are no reviews yet.