Click to enlarge
GAOTek Lab Water Testing Machine
Back to products
GAOTek Ozone Dissolved PH Detector

GAOTek High Accuracy Ozone Detector

This High accuracy ozone detector has humidity range of 0% RH to 80% RH, repeatability of less than 0.5 percent and power consumption of 2.8 W.

 

Add to quote
SKU: GAOTek-OZD-117 Category:
Description

Description

Features

  • Real-time monitoring for ambient ozone levels and temperature
  • High-sensitivity electrochemical ozone sensor
  • LCD display with three-color backlights (Green/Yellow/Red)
  • Maximum ozone measuring range: 0 ppb to 5000 ppb
  • Two On/Off dry contact outputs for dual-stage alarms
  • Capable of controlling ozone generators or ventilators
  • Buzzer alarm and 3-color backlight LCD indications
  • Provides 1X analog output (0 VDC to 2 VDC 10 VDC/4 mA to 20mA) for use as a transmitter
  • Equipped with Modbus RS485 interface with 15 KV antistatic protection and individual IP address
  • Calibration and alarm point setup via infrared remote controller or RS485

 

Technical Specifications

Sensor Lifetime >2 years, removable
Temperature Sensor NTC
Humidity Sensor HS Series Capacitive Sensor
Power Supply 24 V AC/V DC (Power Adapter Selectable)
Power Consumption 2.8 W
Response Time <60 seconds at T90
Signal Update 1 second
Warm-up Time <60 seconds
Ozone Measuring Range 0 ppb to 1000 ppb
Display Resolution 1 ppb (0.001 ppm) (0.01 mg/m³)
Accuracy ±0.01 ppm + 10% reading
Nonlinearity <1% FS
Repeatability <0.5%
Zero Drift <1%
Alarm Buzzer and Yellow or Red Backlight Switch
Display Green – Normally, Orange – First Stage Alarm, Red – Second Stage Alarm
Temperature/Humidity Measuring Range 0% RH to 80% RH
Analog Output Linear Output Selectable
Analog Output Resolution 16 bits
Relay Dry Contact Output Two Dry-Contact Outputs
Max Switching Current 3 A (220 VAC/30 VDC), Resistance Load
Modbus Communication Interface Modbus RTU Protocol with 19200 bps (Default)
Antistatic Protection 15 KV Antistatic Protection
Working Condition/Storage Conditions  0% RH to 80% RH
Installation Standard 2.56 in x 2.56 in (65.024 mm x 65.024 mm) or 3.35 in x 3.35 in (85.09 mm x 85.09 mm) or 2 in x 4 in (50.8 mm x 101.6 mm) Wire Box
Interface Connection (Max) 9 Terminals
Wiring Standard Wire Section Area <1.5 mm²
Manufacturing Process ISO 9001 Certified
Housing and IP Class PC/ABS Fireproof Plastic Material, Protection Class: IP30
Compliance EMC Directive 89/336/EEC
Net Weight 0.41 lb (190 g)
Dimensions 5.12 in x 3.35 in x 1.44 in (130 mm x 85 mm x 36.5 mm) (H x W x D)