Description
Overview
GAOTek vibration meter is rugged and reliable, this portable multifunction vibration meter checks bearings and overall vibrations. Get quantifiable information on the overall health of motors and other rotating equipment with this vibration screening device that features the powerful Fluke Connect software.
Features
- Innovative sensor design ensures consistent data quality
- Four-level severity scale assesses urgency of vibration issues
- USB exportable data; trending in Microsoft Excel
- Units: Acceleration: g, m/sec2
- Velocity: in/sec, mm/sec
- Displacement: mils, mm
- Crest Factor+ for reliable bearing assessment
- Colored lighting system and on-screen comments guide measurements
- Temperature measurement with Spot IR Sensor
- On-board memory for up to 3,500 measurements
- Audio output for listening to bearing tones
- External accelerometer support for hard-to-reach locations
- Flashlight for dark area measurements
- Large, high-resolution screen for easy navigation and viewing
Technical Specifications
| Low Frequency Range (Overall Measurement) |
10 Hz to 1000 Hz |
| High Frequency Range (CF+ Measurement) | 4000 Hz to 20,000 Hz |
| Severity Levels | Good, satisfactory, unsatisfactory, unacceptable |
| Vibration Limit | 0.11 lb (50 g) peak (0.22 lb per 100 g peak-peak) |
| A or D Converter | 16-bit |
| Signal to Noise Ratio | 80 dB |
| Sampling Rate | Low frequency 20,000 Hz High frequency 80,000 Hz |
| Real Time Clock Backup | Coin battery |
| Sensitivity | 100 mV lb ±10% |
| Measurement Range | 0.022 lb to 0.11 lb (0.01 g to 50 g) |
| Low Frequency Range (Overall Measurement) | 10 Hz to 1000 Hz |
| High Frequency Range | 4000 Hz to 20,000 Hz |
| Resolution | 0.01 g |
| Accuracy | At 100 Hz ±5% of measured value |
| Focal Length | Fixed, at 1.5 in (3.8 cm) |
| Frequency Range | 10 Hz to 1000 Hz |
| Bias Voltage(To Supply Power) | 20 V to 22 V DC |
| Bias Current (To Supply Power) | Maximum 5 mA |
| Accuracy | ±35.6 °F (2 °C) |
| Range | -4 °F to 392 °F (-20 °C to 200 °C) |