Description
Overview
GAOTek securepark proscan barrier with FHD vehicle detection integrated camera using a low-power high-performance ARM processor and a 2 mega pixel low-light CMOS sensor, it is an intelligent device that integrates vehicle identification, camera, storage, and multi-interface input. This product is specially designed for the parking lot industry based on embedded intelligent high-definition vehicle identification products, which can be widely used in various parking lot entrances and exits, community entrances and exits, highway entrances and exits.
Features
- All-day vehicle detection rate is higher than 99.9%
- Support multiple input interface configurations
- Video compression technology H.264 is used for video coding
- Built-in fill light; forced switching on the built-in
- Support TF card storage
- Supports three detection methods: coil detection, video detection
- Support OSD information overlay function, support video
Technical Specifications
| Vehicle Detection Rate | ≥ 99.9% |
| Adapt to the Speed Range | 0 km or h to 30 Km or h |
| Recognition Angle | ≤ 45° |
| Sensor Type | CMOS |
| Lens and Focal Length | Zoom 0.110 in to 0.47 in (2.8 mm to 12 mm) |
| Exposure Time | 1 or 100 s to 1 or 10000 s (about 3 hours) |
| Image Size | 1080 P, 720 P, 4 CIF, CIF |
| Compression Standard | H.264 or JPEG |
| Compressed Output Bit Rate | 384 Kbps to 4 Mbps |
| Maximum Frame Rate | Mainstream 25 FPS, sub-stream 25 FPS |
| Image Setting | Adjustable shutter, gain, brightness, etc. |
| Capture Trigger Type | Video, coil, video + coil |
| Output Information | Vehicle big picture, vehicle small picture |
| OSD Information Overlay | Support, define time, location, etc. |
| Built-In Fill Light | Built-in LED fill light, adjustable brightness |
| One-Button Reset | Short press 2 sec to restore the default IP, username and password, Press and hold for 10 sec to restore the default IP, username and password, factory configuration |
| Local Video | Support PC local recording |
| The Internet | 1 RJ45 100 M adaptive network interface |
| Communication | 2 RS485 interfaces |
| Power Supply | 1 AC90 to 265 V voltage interface |
| Input | 2-way switch or level, 2-way switch input |
| Output | 2-way switch output interface (relay) |
| Reset | 1 reset button interface |
| Storage | 1 TF card interface |
| USB | 1 standard A type USB interface |
| Total Power | Turn off the light < 4 W, turn on the light < 5 W |
| Working Humidity | < 95% (no condensation) |
| Protection Level | IP65 |
| Operating Temperature | -22 °F to 167 °F (-30 °C to +75 °C) |
| Size | 17.44 in x 5.74 in x 4.13 in (443 mm x 146 mm x 105 mm) |
| Weight | 3.96 lb (1.8 kg) |