Operation, Maintenance & Calibration of a Waterproof Drones

Below are general answers on how to operate, maintain and calibrate a waterproof drone from the list of GAO Tek’s Waterproof Drones .

Operating of a Waterproof Drones

Inspect the Drone: Examine the drone for any visible damage, ensuring all parts are intact.
Battery Check: Ensure batteries are fully charged and securely attached. Waterproof drones often require specially sealed batteries.
Propeller Inspection: Check that all propellers are undamaged and properly secured.
Firmware Updates: Confirm that the drone’s firmware is up-to-date to avoid software issues during flight.
Select a Safe Launch Site: Choose a flat, stable surface, ideally free from water spray if launching near a body of water.
Power On: Turn on the remote controller first, followed by the drone. This sequence helps ensure a proper connection.
Calibrate Sensors: Perform a compass calibration as recommended by the manufacturer to prevent magnetic interference issues.
Slow Descent: Gradually reduce altitude, avoiding rapid descent to prevent damage.
Post-Flight Checks: After landing, power off the drone first, then the controller. Inspect the drone for any signs of damage.

Post-Flight Rinse: After flying in saltwater or dirty conditions, rinse the drone with fresh water to remove any residue.
Drying: Thoroughly dry the drone using a microfiber cloth. Ensure no water remains in crevices or the battery compartment.
Storage: Store batteries in a cool, dry place. Avoid exposure to extreme temperatures.
Cycle Batteries: Regularly discharge and recharge batteries to maintain their health. Follow manufacturer guidelines for specific cycling procedures.
Check Seals and Gaskets: Regularly inspect seals and gaskets for wear and tear. Replace any that show signs of deterioration to maintain waterproof integrity.
Propeller Maintenance: Inspect propellers for cracks or damage and replace them as necessary.

Location: Perform calibration in an area free from magnetic interference (away from metal structures, electronics, etc.).
Procedure: Follow the manufacturer’s instructions, which usually involve rotating the drone in specific orientations.
Stable Surface: Place the drone on a flat, stable surface.
Calibration Steps: Use the drone’s control app or remote to initiate IMU calibration. Follow on-screen instructions, which typically involve keeping the drone still during the process.

How to Choose a Waterproof Drones

Components of Waterproof Drones

Customers in the U.S. and Canada of Waterproof Drones

We have products in stock and can ship overnight to most places in the U.S. and Canada.

If you have any questions about our products or want to place an order, our

technical experts can help you. Please fill out this form or email us.