Description
Overview
GAOTek communication network analyzer is applicable to fields of radio communications, cable TV, teaching, and automotive electronics etc. It can be used for performance measurement of RF components such as filter, amplifier, antenna, cable, and cable television sub connectors etc. It adopts Windows operating system, and has functions of error calibration, time domain and fixture simulator. It supports multiple display formats such as logarithmic amplitude, linear amplitude, standing wave, phase, group delay, Smith chart and polar coordinates etc. It provides multiple calibration types including frequency response, single port, response isolation, enhanced response, full dual port, rapid calibration and electrical calibration; It is capable of multi channel and multi window display. It is designed with USB interface, LAN interface, GPIB interface and VGA interface. It can rapidly and accurately measure the amplitude, phase, and group delay characteristics of the DUT S parameter, with efficient and powerful error correction capability.
Features
- accurate measurement on high rejection
- impedance option of 3656A for cable TV components
- 4 port option which can accomplish all 16 S parameters test
- Ultra low trace noise which provide higher test accuracy
- Up to 64 measuring channels implement complex testing schemes rapidly
- Powerful data analysis functions, such as ripple test, bandwidth test
- Time domain analysis function as the standard configuration
- Fixture simulator can simulate various situations
- LAN and GPIB interface, capable of remote control
Technical Specifications.
| Frequency Range | 300 kHz to 20 GHz |
| Frequency Resolution | 1 Hz |
| Frequency Range | 300 kHz to 100 MHz |
| Reflection Track | 300 kHz to 10 MHz |
| Transmission Track | 6 GHz to 20 GHz |
| Effective Directivity | 10 MHz to 3 GHz |
| Effective Source Match | 3 GHz to 6 GHz |
| Effective Load Match | 300 kHz to 10 MHz |
| Test Points | 1 to 16001 |
| IF Bandwidth | 1 Hz to 5 MHz |
| Port Connector Type | 50 ohm system impedance |
| Dynamic Range | Up to 125 dB |
| Test Port | 75 Ω |
| Number Of Test Receivers | 4 |
| Reference Level Amplitude | ± 500 dB |
| Reference Phase Setting | ± 500 ° |
| Time Base Output | 10 MHz |
| Digital Interface | GPIB, USB, Ethernet interface and VGA display |
| Operation System | Windows XP |
| Display | 10.4 in high brightness LCD |
| Test Domain | Frequency domain, Time domain |
| Power Consumption | 150 W |
| Power Supply | 50 Hz single phase 220 V |
| Size | 17.17 in x 9.31 in x 16.14 in (436 mm × 236.5 mm × 410 mm) |
| Weight | 39.68 lb (18 kg) |