Description
Features
- Two wavelengths: 1310 nm or 1550 nm
- Measurement distance 37.2 mi (60 km)
- Touching screen optional
- Test record can be saved as Sor format
- Optical power meter or light source
- Visual fault locator or
- Multi-function tester
- Editable file name and line No
- Support upgrade
- 4 in (10.1 cm) ISP display, 800×480 pixels
- Clear and readable in outdoor sunlight
- Quick boot
- It takes only 2 seconds to test
Â
Technical Specifications
Wavelength | 1310 nm or 1550 nm |
Dynamic Range | 22 dB or 20dB |
Measure Distance | 0 mi to 37.2 mi (0 km to 60 km) |
Fiber Type | SM 9 or 125 single mode optical fiber |
Type Of Connectors | FC PC or SC PC optional |
Peak Value of Laser | ≥30 mW |
UOM Of Measurement | Meter, feet, mile |
Dead Zone of Reflection Event | 6.56 ft (2 m) |
Dead Zone of Attenuation Event | 39.3 ft (12 m) |
Accuracy Distance | About ± (3.2 ft (1m) +2 x10(-4) x distance |
Number Of Test Record Saved | 100 |
Power Supply | 7.4 V Li ion battery 4400 mAH |
Battery Working Time | ≥5000 times of measurements |
Temperature | Operate: 23 °F to 122 °F (-5 ℃ to 50 ℃); Store: 14 °F to 140 °F (-10 ℃ to 60 ℃) |
Humidity | 0 % to 85 % (non-condensing) |
Measurement Range | -70 dBm to +10 dBm; -50 dBm to +26 dBm |
Wavelength Range | 800 nm to 1650 nm |
Calibrated Wavelength | 850 nm ,1300 nm, 1310 nm, 1490 nm, 1550 nm, 1625 nm (another wavelength will be on request) |
Detector | In GaAs |
Accuracy | <±3 % (-10 dBm, 71.6 °F (22 ℃)) |
Resolution | Linearity: 0.1 %; nonlinearity: 0.01 dBm |
Connector | Movable FC or PC SC or PC; ST optional |
Wavelength | 650 nm |
VFL Output Power | ≥10 mW |
Mode | 0 Hz; 1 Hz; 2 Hz |
Fiber Type | SM or MM |
Emitter | FP LD |
Wavelength | 1310 nm or 1550 nm |
Connector | FC or PC (SC or ST as optional) |
Output Power | ≥-5 dBm |
Output Stability (dBm) | ±0.04 at 68 °F (20 ℃) at 15 min |
Modulation | CW or 270 kHz or 1 kHz or 2 kHz |
Fiber Type | SM |
Dimension | 8.66 in x 7.48 in x 3.54 in (22 cm x 19 cm x 9 cm) |
Weight | 0.66 lb. (300 g) |