Description
Overview
GAOTek cable fault locator is field identification problems of multiple cables when high voltage cable construction installation and maintenance. DS V live cable identification detector is designed with modern electronic technology. It is applied for accurately identifying multiple cables on site, overcoming power outages or personal safety accidents by cutting the wrong cable, and improving work efficiency greatly. This product can be used in both AC and DC work more conveniently for field use.
Features
- Identification accuracy
- The clamps are suitable for all kinds of cables
- The operation is very simple
- The instructions are clear and intuitive.
- Portable, beautiful, good feel
- Reliable operation of the whole
- The machine is not short-circuited
- Power output frequency adjustable
- Receiver sensitivity adjustable
- Live cable identification
- Power failure cable identification
- The online identification of the running
- The state of the cable greatly improves
- The work efficiency and reduces
- The economic loss caused by power failure
- There is no need to disconnect both ends of the running
- Cable from the power distribution equipment
- Which ensures the normal
- Operation of the electrical equipment
- With the indirect coupling mode
- There is no electrical contact between
- The operator and the cable
- Which primarily ensures the operator’s safety.
- Dc power supply, standby time of each
- Charge is more than 8 hrs
- It is very convenient to use on site
- Clamp open Ñ„120
- Suitable for all kinds of sectional area cable identification
- Digital, grating, sound three interfaces
- The same time prompt signal strength
- Recognition intuitive
Technical Specifications
| Identification Of the Cable | High voltage cable identification, low voltage cable identification |
| Mode | Live cable identification and no live cable identification |
| Power Supply | DC supply |
| Level | High voltage (10 KV cable,35 KV cable), low voltage (200 V cable, 380 V cable, long distance conductor) |
| The Identification Accuracy | 100% |
| Clamp | Φ4.72 in (120 mm), Applicable to all kinds of (high voltage, low voltage, single core, multi-core) cable (live or power failure) identification work |
| Transmitter | Output signal: output four kind of frequency: 815 kHz, 8 kHz, 33 KHz, 83 KHz Output power: Constant power output, low, medium and high, max 15 W Output mode: Coupling induction type, direct input type Impedance display: with 100000 Ohm Display: LCD with backlight Power: standard 1# 1.2 V charge battery 6 joints, Standby time is over 8 hrs, Electricity prompt Overheat, over current: auto protection Working temperature：-4 °F to 122 °F (-20 ℃ to 50 ℃) |
| Receiver | Receiver frequency: receive 5 frequencies: 815 kHz, 8 kHz, 33 KHz, 83 KHz, 50 kHz Receiving mode: coupling clamp Signal interface: digital, grating and sound interface simultaneously indicate signal strength Display: LCD with backlight Adjustment: manual, range 000 dB to 00 dB Detecting length: connect cable directly, longest 9.32 mi (15 km). When coupled cable, Primary coupling measure 1.86 mi (3 km) Multiple coupling is infinitely far away. Power: standard 5# 1.2 V charge batter 6, charge discharge 500 times. standby time: over 12 hrs Over-heat, over current: auto protection Working temperature: 32 °F to 104 °F (0 °C to 40 °C) |
| Clamp Open | Inner diameter when closed ≥4.92 in (125 mm) |
| Power | 1.0 KVA (Intermittent instantaneous) |
| Identification Way | Judge by the direction of the pointer swing |
| Size | 11.8 in x 11.8 in x 7.08 in (30 cm x 30 cm x 18 cm) |
| Weight | 12.7 lb (5.8 kg) |