Click to enlarge
Ultra-Wideband Signal Generator with Low Phase Noise & Touch GUI - GAOTek
Back to products
GAOTek Wi – fi Mobile Signal Tester

SFP+ Optical Module DWDM-40 km 10 Gb/s Transceiver – GAOTek

The high performance DWDM EML transmitter and high sensitivity PIN receiver provides superior performance for Ethernet applications at up to 40km links.

Add to quote
SKU: GAOTek-SCB-119 Category:
Description

Description

Overview

GAOTek SFP+ Optical Module DWDM-40 km 10 Gb/s Transceiver is a very compact 10 Gb/s optical transceiver module for serial optical communication applications at 10 Gb/s. It converts a 10 Gb/s serial electrical data stream to 10 Gb/s optical output signal and a 10Gb/s optical input signal to 10Gb/s serial electrical data streams. The high speed 10 Gb/s electrical interface is fully compliant with SFI specification. The high performance DWDM EML transmitter and high sensitivity PIN receiver provides superior performance for Ethernet applications at up to 40km links. The SFP+ Module complaints with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The fully SFP compliant form factor provides hot pluggability, easy optical port upgrades and low EMI emission.

Features

  • Supports 9.95 Gb/s to 11.3 Gb/s bit rates
  • Hot-Pluggable
  • Duplex LC connector
  • 100 GHz ITU Grid, C Band
  • DWDM EML transmitter, PIN photodetector
  • SMF links up to 40 km
  • 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface
  • Power Supply: +3.3 V
  • Power consumption<1.8 W
  • Temperature Range: 0 °C ~ 70 °C
  • RoHS compliant

 

Technical Specifications

Absolute Maximum Ratings

Parameter Symbol Min. Typical Max. Unit
Storage Temperature TS -40   +85 °C
Case Operating Temperature TA 0   70 °C
Maximum Supply Voltage Vcc -0.5   4 V
Relative Humidity RH 0   85 %

Electrical Characteristics (TOP = 0 °C to 70 °C, VCC = 3.135 V to 3.465V)

Parameter Symbol Min. Typical Max. Unit Note
Supply Voltage Vcc 3.135   3.465 V  
Supply Current Icc     500 mA  
Power Consumption P     1.8 W  
Transmitter Section:
Input differential impedance Rin   100   Ω 1
Tx Input Single Ended DC Voltage Tolerance (Ref VeeT) V -0.3   4 V  
Differential input voltage swing Vin,pp 180   700 mV 2
Transmit Disable Voltage VD 2   Vcc V 3
Transmit Enable Voltage VEN Vee   Vee+0.8 V  
Receiver Section:
Single Ended Output Voltage Tolerance V -0.3   4 V  
Rx Output Diff Voltage Vo 300   850 mV  
Rx Output Rise and Fall Time Tr/Tf 30     ps 4
LOS Fault VLOS fault 2   VccHOST V 5
LOS Normal VLOS norm Vee   Vee+0.8 V 5

Optical Parameters (TOP = 0 °C to 70 °C, VCC = 3.135 V to 3.465 V)

Parameter Symbol Min. Typical Max. Unit Note
Transmitter Section:
Optical Wavelength-End Of Life λ X-100 X X+100 pm  
Optical Wavelength-Beginning Of Life λ X-25 X X+25 pm  
Average Optical Power Pavg -1   +4 dBm 1
Laser Off Power Poff     -30 dBm  
Extinction Ratio ER 8.2     dB  
Transmitter Dispersion Penalty TDP     3.0 dB 2
Relative Intensity Noise Rin     -128 dB/Hz 3
Optical Return Loss Tolerance   20     dB  
Receiver Section:
Center Wavelength λr 1480   1580 nm  
Receiver Sensitivity Sen     -16 dBm 4
Stressed Sensitivity (OMA) SenST     -14.5 dBm 4
Los Assert LOSA -27   – dBm  
Los Dessert LOSD     -17 dBm  
Los Hysteresis LOSH 0.5     dB  
Overload Sat 0     dBm 5
Receiver Reflectance Rrx     -12 dB