Click to enlarge
GAOTek Digital Flaw Detector
Back to products
GAOTek Jumper Hot Melt Machine

Single 9s Splicing Time Fiber Splicer 300x Magnification – GAOTek

Single fiber fusion splicer with 9s splicing, 300x magnification, 30s heating, 2500 electrode life, and >60 dB return loss for precise core alignment.

Add to quote
SKU: GAOTek-FFS-177 Category:
Description

Description

Feature

  • Core-Core & Clad – Clad Alignment
  • PAS Technology
  • Fiber core & clad display with high resolution
  • X & Y view display or X or Y single display
  • Auto check leaved end face
  • 7 in (14.48 cm) color LCD
  • Software update via USB port

 

Technical specifications

Applicable fibers SM MM DS NZDS
Fiber diameter Cladding diameter: 80 μm to 150 μmCoating diameter: 100 μm to 1000 μm
Fiber count Single
Fiber cleaved length 0.472 in to 0.63 in (12 mm to 16 mm)(Coating diameter: 250 μm)
Actual average splice loss 0.02 dB (SM), 0.01 dB (MM), 0.04 dB (DS), 0.04 dB (NZDS)
Typical splicing time Typical 9 s (standard SM fiber)
Return loss >60 dB
Splicing mode Auto Calibrate Normal Special
Fiber aligning method Meticulous, Core, Clad, Manual
Splicing program 53 (templet), 40(user)
Tube heating program 9 (templet), 24(user)
Tube typical heating time Typical 30 s
Protection sleeve length 2.36 in (60 mm), 1.57 in (40 mm)
Storage of splice result 4000 results, 20 parameter per result
Fiber image magnification 300 x (X or Y view)150 x (X and Y view)
Battery capacity Typical 400 cycles (splice or tube heat with inner Li battery)
Monitor 5.7 in (14.48 cm) color LCD monitor
Tension test 2 N
Electrode life 2500
Terminal USB
Power supply AC 100 V to 240 V with AC adapter Inner Li battery (7800 mAh)DC 13.5 V
Operating condition 0 mi to 3.11 mi (0 m to 5000 m) above sea level14 ° F to 122 ° F (-10 °C to 50 ℃)

Max wind velocity of 15 m/s
Dimension 5.91 in x 5.91 in x 5.91 in (150 mm x 150 mm × 150 mm)
Weight 5.62 lb (2.55 kg) excluding battery6.72 lb (3.05 kg) including battery