Description
Overview
GAOTek USB Vector Network Analyzer, 100 kHz-6 GHz, 95 dB Dynamic is a USB based full 2-port vector network analyzer designed by Jankae. Using 3 ADCs to sample data simultaneously and using FPGAs for signal processing, it is capable of scanning over 10,000 points of full dual-port measurements in less than 1 second. The ultra-low noise power supply design and the use of 16bit ADC, together with the precision CNC’s aluminum shielded housing, achieve up to 100dB of effective dynamics. Many aspects are already comparable to lab-grade VNAs, but this is still a work-in-progress project. Some design features may not be perfect, especially the performance will drop when the frequency is higher than 3GHz, please fully understand the possible limitations before buying this machine. If you have any suggestions for future releases, please feel free to contact us as well.Â
Â
Technical Specifications
| Impedance | 50 Ω |
| Test Port Connector | SMA, female |
| Number of Test Ports | 2Â |
| Frequency Range | 100 kHz to 6 GHz |
| Frequency Accuracy | <2 ppm |
| Number of Measurement Points | 2 to 4501Â |
| Speed (2-port) | 4000 points < 500 ms (IFBW = 50 kHz)Â |
| Measurement Bandwidths | 10 Hz to 50 kHz |
| Dynamic Range (IFBW 10 Hz) | > 95 dB to 3 GHz > 50 dB to 6 GHz (Note 1) |
| Measurement Parameters | S11, S21, S12, S22Â |
| Reflection Directivity | > 40 dB (after calibration) (Note 2)Â |
| Output Power | -40 dBm to 0 dBm (Note 3)Â |
| Power Supply | DC 5 V, 1.5 A (USB powered, or 3.5mm connector)Â |
| Power Consumption | Approx. 7WÂ |
| Interface | USB type CÂ |
| Supported Operating System | Windows, Linux, MacOS (Only 64-bit software is available for now)Â |
| External Reference Input | SMA female; 10 MHz |
| External Reference Output | SMA female; 10 MHz or 100 MHz |
| Further Measurement Options | Simple spectrum analyzer (Lack of mirror suppression and slower speed)Signal generator (Not precisely calibrated)Â Â |