Description
Overview
GAOTek Phase Meter with Wire Examination (Phase Detection) is a tool used in electrical engineering to determine the phase relationship between two or more electrical conductors or circuits. It is particularly useful in AC (alternating current) systems where the phase difference between circuits is crucial for proper operation. Identify the phase angle and sequence of the voltage waveform in different conductors or circuits. Phase detection is essential for various applications, including power distribution, power factor correction, motor control, and synchronization of generators.
Technical Specifications
| Power supply | DC 3 V AA Mn batteries (R6P) × 2 PCS. Can perform continuously for 200 Hours |
| Live voltage range | AC 70 to 1000 V, 45 Hz to 65 Hz (Sine Wave Continuous Input) |
| Clamp wire size | Diameter ø 0.06 to ø 0.6 in (ø 1.6 to ø 16 mm) |
| LED display | [Positive Phase Sequence] The Four Phase-Sequence Lamps Blink in Order (Clockwise)[Negative Phase Sequence] The Four Phase-Sequence Lamps Blink in Order (Counter-clockwise)
[Live-Voltage Indication] L1, L2, L3 Lamps Light Up [Default Phase] L1/L2/L3 Lamp is Off [Open Circuit] L1/L2/L3 Lamp is Off |
| Battery Indication | Power indicator lights up after power onLow Battery lights up when power is insufficient |
| Meter dimension | W× H × T: 2.7 in × 2.9 in × 1.1 in (70 mm × 75 mm × 30 mm) |
| Clamp lead length | 1.9 Ft (0.6 m) |
| Meter weight | 0.4 lb (0.2 kg) (With Battery) |
| Working temperature | 14 °F to 131 °F (-10 °C to 55 °C) Humidity: Below 80 % RH |
| Storage temperature | -4 °F to 140 °F (-20 °C to 60 °C) Humidity: below 90% RH |
| Maximum measured voltage | AC 1000 V |
| Dielectric strength | 5.4 kV rms |
| Maximum rated power | 300 mVA |