LCR Meters
GAO’s electrical LCR meters are electronic devices used to measure the inductance (L), capacitance (C), and resistance (R) of electronic components such as capacitors, inductors, and resistors. GAO electrical LCR meters work by applying an AC voltage or current to the component being measured and then measuring the resulting current or voltage. The instrument then uses this information to calculate the component’s LCR values. Our electrical LCR meters typically have a variety of measurement modes and ranges, allowing them to measure a wide range of components accurately.
GAO’s electrical LCR meters are composed of source, signal conditioning circuitry, measurement circuitry, display, input and output connectors, control circuitry, and power supply.
LCR meters are also called impedance analyzers, impedance meters, component analyzers, component testers, RLC meters, LCZ meters, Q meters, phase angle meters, ESR meters, vector impedance meters, network analyzers, electrical parameter testers, inductance-capacitance-resistance analyzers, component characterization devices, passive component analyzers, complex impedance meters, electrical component testers, electrical parameter analyzers, passive network analyzers and multi-functional LCR bridges.
Inductance Meter with Data Hold (Handler)
Inductance Meter With Handler (Beep)
Capacitance Meter with SCPI Programming Language
Leakage Current Recorder with Insulation Fault (Accuracy)
GAOTek Volumetric Liquid Meter for Petroleum Products
GAOTek Handheld LCR Meter
GAOTek High Accuracy Digital LCR Meter LCR Tester
GAOTek Precision 32-Bit Core Processor LCD Display LCR Meter
GAOTek Digital LCR Meter
GAOTek Programmable High Precision Multifunctional LCR
GAOTek Precision LCR Meter
GAOTek Desktop Digital Bridge (200KHZ) LCR Meter
GAO Tek’s electrical LCR meters have the following functions:
- Quality factor (Q) measurement: GAO’s electrical LCR meters can measure the quality factor of a component, which is a measure of the component's energy loss.
- Equivalent series resistance (ESR) measurement:Â GAO electrical LCR meters can measure the equivalent series resistance of a component, which is a measure of the resistance in series with a component's ideal capacitance or inductance.
- Test frequency selection:Â GAO Tek electrical LCR meters can be set to test a component at a specific frequency or range of frequencies.
- Automatic range selection:Â Our electrical LCR meters can automatically adjust their measurement range based on the component being tested.
- Data logging: GAO’s electrical LCR meters can store measurement data for later analysis.
- Comparison mode:Â GAO Tek electrical LCR meters can compare measured values to preset or user-defined values, indicating pass/fail status.
GAO Tek’s electrical LCR meters are rugged, versatile and precision measurement instruments. They comply with applicable industry standards such as IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11, IEC 61010-1, and IEC 61326-1.
Our electrical LCR meters help our customers comply with relevant U.S. government regulations such as:
- Federal Communications Commission (FCC)
- Occupational Safety and Health Administration (OSHA)
- National Institute of Standards and Technology (NIST)
- Environmental Protection Agency (EPA)
- Consumer Product Safety Commission (CPSC)
- Underwriters Laboratories (UL)
Our electrical LCR meters help our clients in complying with relevant Canadian government regulations such as:
- Industry Canada
- Canadian Occupational Health and Safety (OHS)
- Measurement Canada
- Environment Canada
- Canadian Consumer Product Safety Act (CCPSA)
- CSA Group regulations
Our electrical LCR meters have the following applications:
- Component testing: GAO’s electrical LCR meters are used to measure the electrical properties of electronic components, such as resistors, capacitors, and inductors. These measurements are used to verify component specifications, to select components for specific applications, and to diagnose component failures.
- Circuit testing:Â GAO Tek electrical LCR meters can be used to test the electrical properties of circuits, such as filters, oscillators, and amplifiers. These measurements are used to verify circuit specifications, to diagnose circuit problems, and to optimize circuit performance.
- Quality control:Â Our electrical LCR meters are used in manufacturing to ensure that electronic components and circuits meet specified tolerances and specifications. This helps to ensure that the finished products are reliable and meet customer requirements.
- Research and development:Â GAO electrical LCR meters are used in research and development to study the electrical properties of materials, to develop new electronic components and circuits, and to optimize existing designs.
- Education: GAO’s electrical LCR meters are used in educational settings to teach students about electronic components and circuits, and to demonstrate the principles of electrical measurement.
Our electrical LCR meters can be shipped overnight within the continental U.S. and Canada, and can be shipped globally.