Inductance Meter with Data Hold (Handler)

This Inductance Meter with Data Hold (Handler) comes with an in-built handler and RS-232C interface and is used to measure parameters such as series inductance Ls, parallel inductance Lp, equivalent series resistance ESR, equivalent parallel resistance EPR and quality factor Q

GT00YN00ZZ

Description

Overview

The GAOTek Inductance Meter with Data Hold (Handler) can be used to measure many parameters, such as series inductance Ls, parallel inductance Lp, equivalent series resistance ESR, equivalent parallel resistance EPR, quality factor Q, etc. This device comes with an in-built handler and RS-232C interfaces which help build an automatic component sorting system.

Key Features

  • Display: 3-Lines VFD
  • Correction function: OPEN and SHORT
  • View: ΔABS, Δ% or Sorting Result on 3rd Line
  • Comparator Function: 20 files, P1, P2, P3, NG, AUX, HI, IN, LO
  • Interface: RS-232C and Handler
  • Optional Interface: USB
  • Key lock function
  • Data Hold function

Technical Specifications

Parameters L-Q, L-ESR, L-EPR, R-Q
Accuracy 0.05 %
Frequency 50 Hz – 100 kHz (10 points)
Display Range L: 0.0001 μH – 9999 H

R: 0.0001 Ω – 99.99M Ω

Q: 0.00001 – 99999.9

Δ %: -9999 % – 9999 %

Source Resistance 30 Ω, 50 Ω, 100 Ω
Range Automatic and manual with 9 ranges
Signal Level 0.1V rms, 0.3V rms, 1V rms
Speed 15 times/second, 5 times/second, 2 times/second
Equivalent Circuit  In series and parallel
Adjustment Open-circuit point or sweep frequency zero reset; short-circuit point or sweep frequency zero reset
Comparator 20 groups record, 5-bin sorting, beep
Interface RS-232 and Handler interface
Others Four color high definition color screen VFD display Keypad lock and data hold function
GENERAL FEATURES
Power Supply Voltage: 198 V AC – 240 V AC V AC  Frequency: 50Hz   Power: Max 15 VA
Dimension 

 

 

Weight

Outside (W×H×D): 10.39 in x 4.29 in x 13.77 in (264 mm x 107 mm x 350 mm)

Inside (W×H×D): 8.50 in x 3.46 in x 12.71 in (216 mm x 88 mm x 323 mm)

Weight : 8.81 lbs (4 kgs)

Additional Information

  • Measurement Parameter: L, Q, ESR, EPR
  • Measurement Level:1 V, 0.3 V, 1.0 V
  • Measurement Level:1 V, 0.3 V, 1.0 V
  • Measurement Speed:3 times/s, 8 times/s, 20 times/s
  • Basic Accuracy:05 %

Accessories

  1. Test cable
  2. Test Fixture
  3. Short-circuit device
  4. RS-232 communication cable

Reviews

There are no reviews yet.

Be the first to review “Inductance Meter with Data Hold (Handler)”

Your email address will not be published. Required fields are marked *