Showing 169–192 of 1364 results

Show sidebar
Show 12 24 36 All

GAOTek DC Ground Fault Locator

SKU: GAOTek-GFL-136
This DC Ground Fault Locator has 0 V to 300 V DC voltage measurement range, 0 V to 300 V AC voltage measurement range, and 0.5% accuracy.
Add to quote
Quick view

GAOTek DC Grounding Underground Power Cable Fault Locator

SKU: GAOTek-GFL-108
GAOTek product is mainly used for underground power cable (especially the single core high voltage cable) metal sheath grounding fault accurately pinpointing
Add to quote
Quick view

GAOTek DC Or AC Clamp Meter

SKU: GAOTek-CM-147
This DC or AC clamp meter has 0.91 in jaw opening, 10 MΩ input impedance, 10 mA current consumption, and 15 mA power consumption.
Add to quote
Quick view

GAOTek DC Or AC Clamp Meter

SKU: GAOTek-CM-144
GAOTek DC or AC clamp meter can be used in most industrial and commercial applications where nonlinear loads distort current or voltage waveform.
Add to quote
Quick view

GAOTek DC Resistance Tester

SKU: GAOTek-OHM-167
This DC Resistance Tester has work temperature of 14 °F to 122 °F, work power of AC 220 V ± 10%, and environment humidity of over 85% RH.
Add to quote
Quick view

GAOTek DC Resistance Testers

SKU: GAOTek-TLT-190
GAOTek DC resistance tester has overhauling and changing tap switch, it is also an important detecting project after fault.
Add to quote
Quick view

GAOTek DC Resistance Transmission Line Testers

SKU: GAOTek-TLT-191
GAOTek resistance tester has dc resistance is transformer manufacturing of semi-finished products, finished products testing, installation, commissioning test and power sector preventive test will measure project, can effectively find the transformer coil material selection, welding, loose connection parts, short, break the blemish such as manufacturing and running after the existence of hidden dangers.
Add to quote
Quick view

GAOTek DC Resistance Transmission Line Testers

SKU: GAOTek-TLTX-192
GAOTek DC resistance transmission line testers is apply to the test for all kind of sensibility on-load DC resistance and low-voltage switcher touched resistance, cable or weld resistance of transformer, large generator, CTPT, etc.
Add to quote
Quick view

GAOTek DC System Ground Fault Detector Tester Fault Locator

SKU: GAOTek-GFL-104
GAOTek DC System Ground Fault Tester can be applied to dc systems of any voltage level, equipped with a high-precision detection clamp table, which greatly improves the detection range and anti-interference ability through efficient processing of multiple signals.
Add to quote
Quick view

GAOTek DC System Ground-Fault Locator

SKU: GAOTek-GFL-137
This DC System Ground-Fault Locator has 2.5 Hz of output signal frequency, AC 220 V of power supply voltage and input insurance of 200 mA.
Add to quote
Quick view

GAOTek DDS Function Generator

SKU: GAOTek-FG-122
GAOTek DDS function generator, is a series of dual-channel function or arbitrary waveform generators with specifications of up to 120 MHz maximum bandwidth, a 1.2 GSa/s sampling rate, and 16-bit vertical resolution.
Add to quote
Quick view

GAOTek DDS Function Generator

SKU: A0230004tek
This DDS(Direct Digital Synthesized) function generator has a highly accurate and highly stable output. It’s designed based on DDS(Direct Digital Synthesized) technology. Its frequency range is 40
Add to quote
Quick view

GAOTek DDS Function Generator (40 µHz to 60 MHz)

SKU: A0230007tek
This highly accurate DDS function generator based has highly stable output and has a frequency range of 40 µHz to 60 MHz and output waveforms include Sine, Square, Pulse and DC
Add to quote
Quick view

GAOTek DDS Signal Function Generator

SKU: GAOTek-FG-125
This DDS Signal function generator has operating voltage of 28 V, output power of 10 W to 100 W, and temperature of 14 °F to 149 °F.
Add to quote
Quick view

GAOTek DDS Signal Generator

SKU: GAOTek-FGS-210
This DDS Signal Generator has resolution of 1 Hz, sine wave of 1 Hz to 500 KHz, square wave of 1 Hz to 20 kHz and triangular wave of 1 Hz to 20 kHz.
Add to quote
Quick view

GAOTek Debugging Tool Protocol Analyzer

SKU: GAOTek-PELA-314
GAOTek debugging tool protocol analyzer is a hardware and software open-source logic Analyzer developed and produced by Muse Lab.
Add to quote
Quick view

GAOTek Desktop Digital Bridge (200KHZ) LCR Meter

SKU: GAOTek-LCR-112
Features 0.05 % basic accuracy or 0.1 % basic precision A maximum of 200 time/s measuring speed Frequency measurement range
Add to quote
Quick view

GAOTek Desktop Digital Bridge LCR meter

SKU: GAOTek-LCRMT-145
GAOTek desktop Digital Bridge LCR meter is a component tester with high performance and low price
Add to quote
Quick view

GAOTek Desktop Digital LCR Meter (10 Hz to 100 kHz)

SKU: GAO-LCR-116
GAOTek Desktop Digital LCR Meter adopts 3.5-inch LCD, has friendly user interface and various measurement functions, supports multiple test frequencies and test levels, with basic accuracy up to 0.1%. USB and RS232 can facilitate remote operation.
Add to quote
Quick view

GAOTek Desktop LCR Meter Digital

SKU: GAOTek-LCR-203
GAOTek desktop LCR meter digital are high-precision component parameter analyzers making use of automatic balancing bridge principle, featuring 10 Hz to 1 MHz testing bandwidth, continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control, list scanning and position counting, which can provide accurate and complete measurement and analysis for most components and materials, so it is wildly used in product R&D, component incoming inspection and online product sorting.
Add to quote
Quick view

GAOTek Desktop LCR Tester Capacitance Inductance Meter

SKU: GAOTek-LCRMT-147
This Desktop LCR Tester offers accurate capacitance and inductance measurement with adjustable frequency and test level. USB, RS232 communication.
Add to quote
Quick view

GAOTek Desktop LCR Tester Capacitance Inductance Meter LCR Meter For Testing 10 Hz To 100 KHz Frequency

SKU: GAOTek-LCR-147
This LCR Inductance Meter has a testing level of 0.1 V to 2 V and it is continously adjustable with 1 mV step. Operating temperature of up to 104 °F.
Add to quote
Quick view

GAOTek Desktop USB Digital Storage Oscilloscope

SKU: GAOTek-DOS-149
GAOTek desktop USB digital storage oscilloscopes are super-economical types of digital storage oscilloscopes. The 2-channel oscilloscopes have a bandwidth of 200 MHz.
Add to quote
Quick view

GAOTek Device Programmer

SKU: GAOTek-PELA-271
This Device Programmer has AC adapter of 100 V to 240 V, output voltage of 12 V or 1.5 A, file support of 256 G Bytes, and power supply range of 15 W.
Add to quote
Quick view
Load more products
Loading...