Operation, Maintenance & Calibration of a Follow Me Drones

Below are general answers on how to operate, maintain and calibrate Follow Me drones from the list of GAO Tek’s Follow Me Drones.

Operating a Follow-Me Drone:

Pre-flight Check: Always begin by inspecting the drone for any physical damage, loose parts, or signs of wear. Ensure that the battery is fully charged and securely attached. Check the propellers for damage or debris.
GPS Calibration: Before take-off ensure that the drone’s GPS system is calibrated. This typically involves powering on the drone in an open area away from metal structures or electromagnetic interference and allowing it to connect to GPS satellites for accurate positioning.
Mission Planning: Plan your flight path carefully, considering obstacles, altitude restrictions, and any no-fly zones. Use the follow-me mode in the drone’s software to select the target to follow, whether it’s a GPS-enabled device or a specific point on the map.
Take off and Flight: Once everything is set up, initiate take off following the manufacturer’s instructions. Monitor the drone’s flight path and adjust as necessary to maintain a safe distance from obstacles and ensure smooth tracking of the target.
Emergency Procedures: Be prepared to take immediate action in case of emergencies such as loss of GPS signal, low battery, or unexpected obstacles. Familiarize yourself with the drone’s emergency landing procedures and always prioritize safety.

Regular Inspections: Conduct regular inspections of the drone, including the frame, motors, propellers, and electronic components. Look for signs of wear, damage, or corrosion and address any issues promptly.
Cleaning: Keep the drone clean by regularly removing dust, dirt, and debris from the body and components. Use compressed air or a soft brush to gently clean the motors and propellers, taking care not to damage any delicate parts.
Battery Maintenance: Follow the manufacturer’s guidelines for battery maintenance, including proper charging and storage procedures. Avoid overcharging or discharging the battery and inspect it regularly for signs of swelling or damage.
Software Updates: Stay up to date with the latest firmware and software updates provided by the manufacturer. These updates often include bug fixes, performance improvements, and new features that can enhance the drone’s functionality and reliability.
Storage: Store the drone in a cool, dry place away from direct sunlight and moisture. Use a protective case or bag to prevent damage during transportation and storage.

Compass Calibration: Calibrate the drone’s compass regularly to ensure accurate navigation and orientation. Follow the manufacturer’s instructions for compass calibration, typically involving rotating the drone along multiple axes in a specific pattern.
IMU Calibration: The Inertial Measurement Unit (IMU) is responsible for measuring the drone’s attitude and orientation. Calibrate the IMU according to the manufacturer’s guidelines, usually by placing the drone on a level surface and allowing it to stabilize.
Gimbal Calibration: If your drone is equipped with a gimbal for stabilizing the camera, calibrate it to ensure smooth and stable footage. Follow the manufacturer’s instructions for gimbal calibration, which may involve powering on the drone and gimbal in a specific orientation.
Controller Calibration: If using a separate controller to pilot the drone, calibrate it according to the manufacturer’s instructions. This typically involves powering on the controller while holding down specific buttons or sticks to initiate calibration mode.
Test Flight: After calibrating the drone, perform a test flight in a controlled environment to verify its stability, responsiveness, and accuracy. Make any necessary adjustments based on the flight test results to ensure optimal performance.

The following are other resource pages containing useful information on Follow Me Drones:

We have products in stock, and ship overnight to most parts of the U.S. and Canada.

If you have any questions about our products or want to place an order, our technical experts can help you. Please fill out this form or email us. .