Click to enlarge
GAOTek Drop shipping drone Altitude
Back to products
GAOTek Ohmmeter TTR Tester Portable

GAOTek Motor Stator Tester

This Motor Stator Tester has good temperature range  with LCD display , and frequency of 47.5 Hz to 63 Hz.

Add to quote
SKU: GAOTek-LCR-136 Category:
Description

Description

Features

  • High-resolution:800 x 480,7 in TFT LCD display
  • Programmable multi-channel scanning test
  • Four-terminal measurement technique for R and L
  • The unique switch circuit structure switching six functions with high speed
  • Rich communication interfaces:RS232, USB HOST, USB Device, HANDLER, PLC
  • Support U disk firmware upgrade, save test data to U disk
  • Real-time storage of all parameters without losing after shutdown

 

Technical Specifications

DC Resistance Measurement
Range 0.1 M Ω to 20 K Ω (four-wire measurement)
Basic Accuracy 0.1 M Ω to 200 MΩ ± (0.1 % ± 0.5 m Ω) 200 m Ω or 20 k Ω ± 0.1 %
Inductance Measurement
Test Parameter Ls, Lp
Test Frequency 50 Hz, 60 Hz, 100 Hz, 120 Hz, 1 kHz, 10 kHz, 20 kHz, 40 kHz, 50 kHz, 100 kHz
Test Level 0.1 V, 0.3 V, 1.0 V
Output Impedance 100 Ω
Basic Accuracy 0.1 %
Measurement Display Range 0.001 uH to 9.9999 kH
Insulation Resistance Test
Out-Out Voltage 0.100 kV to 1.000 kV ± (1.5 % of reading + 5 counts)
Resistance Measurement Range 1 M Ω to 10 G Ω
Test Time 0.3 s to 999.9 s
Accuracy < 500 V 1 MΩ to 1 GΩ: ± (10 % of reading + 5 counts) 500 V 1 MΩ to 1 GΩ: ± (5 % of reading + 5 counts) 1 GΩ to 10 GΩ: ± (10 % of reading + 5 counts)
Ac/Dc Withstanding
Output-Voltage Range AC: 0.050 kV to 5.000 kV (± 2 % of reading + 5 digits) DC: 0.050 kV to 6.000 kV (± 2 % of reading +5 digits)
Current Measurement Range AC: 030 mADC: 010 mA
Arc Detect AC: 1 mA 15 mADC: 1 mA 10 mA
Test Time 0.3 s to 999.9 s
Accuracy ± 2 %
Impulse Winding Test
Impulse Voltage 100 V to 5000 V, 10 V step, ± 5 % ± 10 V
Comparison Methods Area, differential area, corona and differential phase
Test Repeated Accuracy 1 %
Other Functions
Test Channels 4 to 12
Test Statistics Statistics function of measurement time and results, up to 1000 pieces
Memory Internal 180 groups (standard waveform data and test setup parameters) U-disk 600 groups
Interface HANDLER (START, STOP, PASS, FAIL, EOM) USB Device, RS232C USB Host (support storage of BMP, GIF, PNG image files and firmware upgrade)
Temperature   & Humidity 32 °F to 104 °F (0 °C to 40 °C) and 90 % RH
Power   Requirements Voltage 99 V to 121 V or 198 V to 242 V
Frequency 47.5 Hz to 63 Hz
Power ≤ 300 VA
Dimension (W × H × D) 16.92 in x 6.88 in x 17.32 in (430 mm × 175 mm × 440 mm)