Description
Features
- The test bandwidth range is 30 kHz to 2.0 GHz
- Applicable to the detection principle of various frequency bands
- Built in ultrasonic sensor and transient ground voltage sensor
- Which can relate to special sensors such as transformer
- GIS, overhead line and cable
- The non-invasive detection method is adopted
- There is no need to cut off power
- No need configures additional high-voltage source in the test process
- Is convenient than the traditional pulse partial discharge detector
- Humanized man-machine interface facilitates
- Data management of different equipment
- Simultaneous interpreting PD signals
- All electrical equipment with different sensors
Technical specification
| Measurement range | 0 dBmV to 60 dBmV |
| Resolution | 1 dB |
| Accuracy | ±1 dB |
| Maximum pulse per cycle | 1400 |
| Measurement frequency band | 3 MHz to 100 MHz |
| Measurement range | -6 dBμV to 68 dBμV |
| Resolution | 1 dB |
| Accuracy | ±1 dB |
| Sensor center frequency | 40 kHz |
| Sensor transmission Impedance | 5 mV or mA |
| Detection frequency | 1 MHz to 30 MHz |
| Sensitivity | 50 pC |
| Shell | ABS |
| Detection frequency band | 300 MHz to 2000 MHz |
| Accuracy | 1 dBmV |
| Sensor frequency band | 300 MHz to 2000 MHz |
| Frequency range | 20 KHz to 200 kHz |
| Humidity | 20% to 85% RH |
| Display | 4 in (10.1 cm) RGB LCD display resolution: 800 x 480 |
| Temperature | -4 ℉ to 122 ℉ (-20 ℃ to +50 ℃) |
| Battery | 3.7 V or 5000 mAh lithium battery |
| Charger | AC 90 V to 264 V or DC 5 V |
| Working time | about 6 hrs |
| Dimension | 8.2 in x 3.9 in x 1.3 in (210 mm x 100 mm x 35 mm) |
| Weight | 0.88 lb (400 g) |