Description
Overview
GAO Tek Z-Wave home room automation is designed for 35mm mounting rails and can control intelligent switches, lighting, heating, and signal devices. These actuators operate on 21 V to 30 V DC bus voltage with a max current of 12mA and power consumption of 250 mA. They offer 4 outputs rated at 16 A for 250 V AC (50 Hz to 60 Hz) within a temperature range of 5 °F to 131 °F. Available in 8 or 12-output configurations, they require a 230 V AC power supply for 4 outputs and can be programmed using Engineering Tool Software ETS. Without the AC supply, all LEDs flash to indicate output status. These actuators enable control of various electrical AC loads, offer multiple programming functions, including time delays and logic operations, and provide clear LED status indications.
Features
- Time Function
- Staircase Lighting
- Scene Control
- Logic Operations
- Status Response
- Forced Operation
- Threshold Setup
- Thermal Valve Control
- Manual Switch
- Switch Status Indication
- Application Support
Technical Specifications
| Electrical Source | 21 V DC to 30 V DC bus voltage electric |
| Working Current | 12 mA |
| Power Consumption | 250 mA |
| Output | 4 |
| Rated Current (AC) | 16 A at 250 V AC (50 Hz to 60 Hz) |
| Temperature Range | 5 °F to 131 °F (-5 °C to 55 °C) |
| Installation Method | Standard 35 mm DIN guide installation |
| Modular Installation | 8 and 12 outputs available |
| Additional AC Power Supply | 230 V AC required for 4 outputs. |
| Engineering Tool Software | ETS (ETS2 v 1.3 or later) |
| LED Indicator | Flashes if 230 V AC not connected. |
| Maximum Output per Output | 6 A per output |
| Manual Switch | Available |
| Visible Switching Status | LED indication |