Description
Overview
GAOTek New!!! 2024 RFID Card Controller is developed by our company with touching keyboard and metallic shell. It has a simple appearance, high-end elegance and stable function. The touchable panel is adopted, which is easy to operate, and the panel is not easy to damage, easy to clean, not easy to scratch and wear, and not affected by water, oil and dust. Built-in high-grade microprocessor, strong anti-metal interference ability, high safety and reliability.It adopts non-contact cards and passwords for access control and can freely set three door opening methods: swipe cards, input password and swipe cards plus input password. Conventional non-contact ID cards or IC cards are supported. It has powerful functions such as door magnetic alarm, tamper alarm, door button, doorbell interface, security level setting, etc. It is very convenient to use and can be widely used in access control, attendance management, security alarm, parking lot management, building automation, elevator control and other fields.
Features
- Support Wiegand output, support to store 5000 users
- Support three ways to open doors swipe cards, input password and swipe cards plus input password
- Ultra-low power consumption, independent password, cost-effective
- Support operates by managing cards, add cards, delete cards, support copy users, and PC computer management.
Technical Specifications
Frequency | 125kHz |
Working Voltage | DC 12V (±5%) |
Working Current | Less than 200mA |
Standby Current | Less than 150mA |
Sensing Distance | 1.18in to 1.97 in (3cm to 5cm) (effect by cards and work environment) |
Working Temperature | 14°F to 122°F (-10℃ to +50) |
Storage Temperature | −4°F to 140°F (-20℃ to +60℃) |
Working Humidity | 20% to 80% |
Output Short Circuit Protection Time | Less than 100µs |
Opening Time | 0 to 99s(adjustable) |
Storage | 5000 users |
Size | 6.30in × 1.97in × 0.81in (160mm x 50mm x 20.5mm) (tolerance±0.2) |
Wiring Definition | Red: DC 12V, Light blue: SEN (door sensor)/LED,  Orange: AL (alarm),Black: GND, Gray: BUT (exit switch)/BEEP,  Purple: BELL+ (doorbell) Brown: BELL- (doorbell), Light green: AUX+,    Yellow: NC (normally closed),Pink: COM (common), Green: WD0/RXD (switched by 5,6 dial),White: WD1/TXD (switched by 5,6 dial),  Blue: NO |