Description
Overview
GAOTek spectrum signal generator is a simple portable spectrum analyzer and signal source designed to display the signal spectrum from 35 MHz to 6200 MHz and the analyzer finds the amplitude and frequency of the spectral components of the analyzed process. The spectrum analyzer can process signals from all widely used technologies Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, another important feature is its tracking generator, which makes it possible to measure the frequency response of passive or active devices (such as filters or amplifiers) The software allows measurement of SWR and return loss modules. This requires an external directional coupler and a set of calibration measures. It is mainly used for on-site operation. The equipment is sturdy and durable, light in weight, and low in energy consumption. It enables service centers and maintenance teams to perform on-site HF analysis for commissioning and repair work. In addition, the spectrum analyzer is the perfect solution for repair shops and radio enthusiasts.
Features
- (8.12 cm) 3.2 in color resistive touch screen
- 35 MHz to 6200 MHz frequency range
- 500 points per sweep
- 2 dB accuracy in 70 dB to 75 dB dynamic range
- Windows compatibility
- PC connectivity
- Convenient use
- Compact size 5.91 in x 2.95 in x 0.91 in (150 mm x 75 mm x 23 mm)
- Lightweight 0.83 lb (380 g)
- 4-hour independent power supply
- Wired data transmission to PC
Â
Technical Specifications
Display Frequency Range | 35 MHz to 6200 MHz |
Dynamic Range | 75 dB (35 MHz to 3000 MHz), 70 dB (3000 MHz to 4500 MHz) |
Max Span | 6165 MHz, Bandwidth 200 kHz |
Scanning Speed | 700 MHz or sec (above 100 MHz) |
Sweep (100 MHz) | < 0.25 seconds |
Noise Floor | -90 dBm (up to 3000 MHz), -85 dBm (3000 MHz to 4500 MHz), -80 dBm (4500 MHz to 6200 MHz) |
Impedance | 50 ohms, Wave Ratio < 1.5 |
Attenuator | 0 dB to 30 dB, Error (up to 10 dB) 2 dB |
Tracking Generator Output Power | -15 dBm to -25 dBm |
Accuracy in Dynamic Range | 2.0 dB |
Max Input Power | 10 dBm |
Max Input Power | +20 dBm |
Max Input Measurement Signal | +10 dBm |
Max Input DC Voltage | 25 V |
Max Current Consumption | 450 mA |
Max Current Consumption | 500 mA (when charging) |
Battery Charge Time | Up to 5 hours |
Display | (8.12 cm) 3.2 in color resistive touch screen |
Frequency Range | 35 MHz to 6200 MHz |
Sweep Speed | 500 points per point |
Measurement Accuracy | 2 dB within 70 dB to 75 dB dynamic range |
Battery | 2500 mAh |
Wave Impedance | 50 ohms |
Accuracy in Dynamic Range | 2 dB |
Maximum Input DC Voltage | 25 V |
Size | 5.91 in x 2.95 in x 0.91 in (150 mm x 75 mm x 23 mm) |
Weight | (380 g) 0.83 lb |