Showing 193–216 of 1534 results

Show sidebar
Show 12 24 36 All

GAOTek DC System Ground Fault Detector Tester Fault Locator

SKU: GAOTek-GFL-104
GAOTek DC System Ground Fault Tester can be applied to dc systems of any voltage level, equipped with a high-precision detection clamp table, which greatly improves the detection range and anti-interference ability through efficient processing of multiple signals.
Add to quote

GAOTek DC System Ground Fault Locator

SKU: GAOTek-HDCGFL-105
GAOTek DC system ground fault locator is a device that uses sinusoidal signal phase processing technology and data transfer algorithm technology to develop and produce.
Add to quote

GAOTek DC System Ground Fault Locator

SKU: GAOTek-WGFL-218
GAOTek DC system ground fault locator is to find the insulation fault of voltage level 48 V, 110 V, 220 V DC system such as indirect grounding, non-metal grounding, Loop grounding, positive and negative grounding, positive and negative balance grounding, AC into DC fault, multi-point grounding.
Add to quote

GAOTek Dc System Ground Fault Tester

SKU: GAOTek-DCGFL-208
GAOTek dc system ground fault tester present, the core problem of power system DC power supply grounding fault search is that the field interference is large, in different DC power supply and different working conditions measurement, most of the products will miss detect and misjudge, poor anti-interference.
Add to quote

GAOTek Dc System Ground Fault Tester

SKU: GAOTek-DCGFL-211
DC system ground fault tester at present, the core problem of power system DC power supply grounding fault search is that the field interference is large, in different DC power supply and different working conditions measurement, most of the products will miss detect and misjudge, poor anti-interference.
Add to quote

GAOTek Dc System Ground Fault Tester

SKU: GAOTek-WGFL-215
GAOTek DC system ground fault tester. At present, the core problem of power system DC system ground fault tester is that the field interference is large, in different DC power supply and different working conditions measurement, most of the products will mis detect and misjudge, poor anti-interference.
Add to quote

GAOTek DC System Ground-Fault Locator

SKU: GAOTek-GFL-137
This DC System Ground-Fault Locator has 2.5 Hz of output signal frequency, AC 220 V of power supply voltage and input insurance of 200 mA.
Add to quote

GAOTek Dc System Ground-Fault Locator

SKU: GAOTek-DCGFL-204
This Portable Dc System Ground-fault Locator has current detection sensitivity 0.5 mA, generator impedance 40 KΩ, and maximum output current 2.5 mA.
Add to quote

GAOTek DC System Grounding Fault Earth Locator

SKU: GAOTek-DCGFL-202
GAOTek dc system grounding fault earth locator configure different sensors to realize partial discharge detection of almost all electrical equipment.
Add to quote

GAOTek DC System Grounding Fault Locator

SKU: GAOTek-DCGFL-230
GAOTek DC system grounding fault locator the core technology of the multiple-pulse method has completely changed the traditional test method, which has fundamentally solved the problem of reading high-resistance fault waveforms that was difficult to solve.
Add to quote

GAOTek DC System Power Substation

SKU: GAOTek-DCGFL-205
This DC system power substation has a accuracy of 0.5%, grounding detection range of to 200 KΩ, and power supply of tested circuit.
Add to quote

GAOTek DC Underground Cable Fault Locator

SKU: GAOTek-WGFL-219
GAOTek DC underground cable fault locator is mainly used for underground power cable (especially the single core high voltage cable) metal sheath grounding fault accurately pinpointing, also can be used in the auxiliary pinpointing of core grounding fault (in the case of sheath have been destroyed).
Add to quote

GAOTek DDS Function Generator

SKU: GAOTek-FG-122
GAOTek DDS function generator, is a series of dual-channel function or arbitrary waveform generators with specifications of up to 120 MHz maximum bandwidth, a 1.2 GSa/s sampling rate, and 16-bit vertical resolution.
Add to quote

GAOTek DDS Function Generator

SKU: A0230004tek
This DDS(Direct Digital Synthesized) function generator has a highly accurate and highly stable output. It’s designed based on DDS(Direct Digital Synthesized) technology. Its frequency range is 40
Add to quote

GAOTek DDS Function Generator (40 µHz to 60 MHz)

SKU: A0230007tek
This highly accurate DDS function generator based has highly stable output and has a frequency range of 40 µHz to 60 MHz and output waveforms include Sine, Square, Pulse and DC
Add to quote

GAOTek DDS Signal Function Generator

SKU: GAOTek-FG-125
This DDS Signal function generator has operating voltage of 28 V, output power of 10 W to 100 W, and temperature of 14 °F to 149 °F.
Add to quote

GAOTek DDS Signal Generator

SKU: GAOTek-FGS-210
This DDS Signal Generator has resolution of 1 Hz, sine wave of 1 Hz to 500 KHz, square wave of 1 Hz to 20 kHz and triangular wave of 1 Hz to 20 kHz.
Add to quote

GAOTek Debugging Tool Protocol Analyzer

SKU: GAOTek-PELA-314
GAOTek debugging tool protocol analyzer is a hardware and software open-source logic Analyzer developed and produced by Muse Lab.
Add to quote

GAOTek Desktop Digital Bridge (200KHZ) LCR Meter

SKU: GAOTek-LCR-112
Features 0.05 % basic accuracy or 0.1 % basic precision A maximum of 200 time/s measuring speed Frequency measurement range
Add to quote

GAOTek Desktop Digital Bridge LCR meter

SKU: GAOTek-LCRMT-145
GAOTek desktop Digital Bridge LCR meter is a component tester with high performance and low price
Add to quote

GAOTek Desktop Digital LCR Meter (10 Hz to 100 kHz)

SKU: GAO-LCR-116
GAOTek Desktop Digital LCR Meter adopts 3.5-inch LCD, has friendly user interface and various measurement functions, supports multiple test frequencies and test levels, with basic accuracy up to 0.1%. USB and RS232 can facilitate remote operation.
Add to quote

GAOTek Desktop Industrial LCR Meter

SKU: GAOTek-ILCRM-120
GAOTek desktop industrial lcr meter is designed using automatic balance bridge principle component parameter analyzer, the tests of 10 HZ to 100 KHZ bandwidth, 0.1 % of the basic classification function provided by the accuracy of measurement and instrument for the vast majority of components and materials to provide accurate and complete the survey and analysis.
Add to quote

GAOTek Desktop LCR Meter Digital

SKU: GAOTek-LCR-203
GAOTek desktop LCR meter digital are high-precision component parameter analyzers making use of automatic balancing bridge principle, featuring 10 Hz to 1 MHz testing bandwidth, continuously adjustable frequency, 0.05% of basic measuring accuracy, automatic level control, list scanning and position counting, which can provide accurate and complete measurement and analysis for most components and materials, so it is wildly used in product R&D, component incoming inspection and online product sorting.
Add to quote

GAOTek Desktop LCR Tester Capacitance Inductance Meter

SKU: GAOTek-LCRMT-147
This Desktop LCR Tester offers accurate capacitance and inductance measurement with adjustable frequency and test level. USB, RS232 communication.
Add to quote
Load more products
Loading...