Additional Information

Meter Specification:

1. Vane Impeller
2. Temperature & Humidity Sensors
3. LCD with White Backlight
4. Unit Button
5. Power Button
6. Set Button
7. Battery Cover
8. Lanyard Attachment Point

Operation:

1. Turning On and Off your Meter

Press the Power Button for over 2 seconds to turn on your meter; After 10 minutes without any operation the meter will power off.

To override the Auto Power Off, hold down the Set Button then press the Power Button to turn on. You will see the Power Symbol appear on the LCD. Warning, the meter will stay on until the battery runs out unless you turn off by holding down the Power Button.

2. Max/Min/Avg Value Measurement Function

In any measurement mode quickly press the Power Button to choose Maximum Reading, a second press will display the Minimum Reading, a third press will display the Average reading and a forth press will return the meter to the standard current readings.

Max: When is this mode the meter will display the maximum value reached

Min: When is this mode the meter will display the minimum value reached

AVG: When is this mode the meter will display the average value reached

*Once the meter is switched on it will start to record the Max/Min/Avg values*

3. Units Switch Function

In any measurement mode quickly press the Units Button to change the measurement units displayed as ^oC or ^oF units display.

4. Hold Function

Press the Units Button over 2 seconds to freeze current readings displayed.

Press this button over 2 seconds again to exit this mode.

5. Switching Operating Modes

Press Set button to change the required mode.

Backlight function

Press Set button over 2 seconds to turn on/off the backlight.

Beaufort scale

The Beaufort scale is always displayed according to current wind speed in all modes.

Operations:

Press SET Button to change the display modes:

Wind Speed -> Wind Chill ->Temperature ->Relative Humidity -> Heat Index -> Dew Point -> Barometric Pressure ->Pressure Altitude

Mode 1: Wind speed

1.  Wind Speed Units: m/s, ft. /min, knots, km/h, mph
2. Max/Min/Avg Wind Speed Reading Display
3. Hold Current Wind Speed Reading
4. Beaufort Scale
5. Wind Speed Readout

Wind Speed Full Display

Mode 2: Wind chill

Wind chill means the effect that air temperature combined with wind speed has on human skin or an object.

1. Wind Chill Units: ^oC or ^oF
2. Max/Min/Avg wind chill reading display
3. Hold Current Wind Chill Reading
4. Beaufort Scale
5. Wind Chill Readout

Wind Chill Full Display

Mode 3: Temperature

1. Temperature Units: ^oC or ^oF
2. Max/Min/Avg Temperature Reading Display
3. Hold Current Temperature Reading
4. Beaufort Scale
5. Temperature Readout

Temperature Full Display

Mode 4: Relative Humidity

1. Relative Humidity Units: %RH
2. Max/Min/Avg Relative Humidity Reading Display
3. Hold Current Relative Humidity Reading
4. Beaufort Scale
5. Relative Humidity Readout

Relative Humidity Full Display

Mode 5: Heat index

The heat index also known as apparent temperature is what the temperature feels like to the human body when relative humidity is compared with air temperature. The heat index is higher than the normal air temperature unless out of range.

1. Heat Index Units: ^oC or ^oF
2. Max/Min/Avg Heat Index Reading Display
3. Hold Current Heat Index Reading
4. Beaufort Scale
5. Heat Index Readout

Heat Index Full Display

Mode 6: Dew point temperature

Dew point temperature means the temperature at which air becomes saturated with moisture.

1. Dew Point Temperature Units: ^oC or ^oF
2. Max/Min/Avg Dew Point Temperature Reading Display
3. Hold Current Dew Point Temperature Reading
4. Beaufort Scale
5. Dew Point Temperature Readout

Dew Point Temperature Full Display

Mode 7: Barometric pressure

1. Barometric Pressure Units: hPa, mbar, inHg
2. Max/Min/Avg Barometric Pressure Reading Display
3. Hold Current Barometric Pressure Reading
4. Beaufort Scale
5. Barometric Pressure Readout

Barometric Pressure Full Display

Mode 8: Pressure Altitude (Absolute/Density & Relative Altitude)

1. Altitude Units: m, ft. (Meters or Feet)
2. Max/Min/Avg Altitude Reading Display
3. Hold Current Altitude Reading
4. Beaufort Scale
5. Altitude Readout

Altitude Full Display

Relative Altitude Measurement:

To view the relative altitude, or the change in altitude since last calibration (referred to as climb or ascent / descent), press and hold the Units Button for two seconds, the LCD will then display the REL interface on screen and then relative altitude (Defaulted value 0 in/m). The value on the screen will change as the Anemometer is moved higher or lower than its current position. Press and hold the Units Button again for two seconds to change back to Absolute (Density) Altitude.

Calibration function:

Step 1.Hold Units Button then turn on meter to enter calibration mode.

Step 2: Press Units button choose the mode from the table, then press Power Button to enter the calibration mode;

Step 3: Press Units Button to choose the unit you wish to change (the selected unit will flash quickly) and press Set Button to adjust to the correct value,

Step 4: Press Power Button for over 2 seconds to store the setting and exit.