Below are general answers on how to operate, maintain, and calibrate a gloss meter from the list of GAO Tek’s gloss meters. To facilitate our customers to a selection of our products, we have further classified our gloss meters by their features: automotive, for coatings, data logging, handheld, multi-angle, single-angle, and wireless.

We have products in stock and can ship overnight to most places in the U.S. and Canada.

If you have any questions about our products or want to place an order, our technical experts can help you. Please fill out this form or email us.

 

Operating the Gloss Meter:

Power On:

  • Turn on the gloss meter using the designated power button.

Calibration:

  • Perform any initial calibration procedures recommended by GAO Tek to ensure accurate measurements.

Measurement Angle:

  • Select the appropriate measurement angle (e.g., 20°, 60°, or 85°) based on the surface being measured.

Measurement Area:

  • Place the gloss meter probe on the surface to be measured, ensuring proper contact and alignment.

Trigger Measurement:

  • Initiate the measurement process using the trigger or measurement button on the gloss meter.

Readings:

  • Record the gloss readings displayed on the meter for analysis or documentation.

 

Maintaining the Gloss Meter:

Cleaning:

  • Regularly clean the gloss meter’s measurement probe and surfaces with a soft, dry cloth to remove dust or debris.

Calibration Checks:

  • Periodically check the gloss meter’s calibration using GAO Tek’s recommended calibration standards or procedures.

Battery Maintenance:

  • If the gloss meter is battery-powered, monitor and replace batteries as needed to ensure consistent performance.

Storage:

  • Store the gloss meter in a protective case or pouch when not in use to prevent damage and maintain accuracy.

 

Calibrating the Gloss Meter:

Reference Standards:

  • Use GAO Tek’s recommended calibration standards or reference samples with known gloss values.

Adjustments:

  • If the gloss meter allows for user adjustments, follow GAO Tek’s instructions for making any necessary calibration adjustments.

Verification:

  • After calibration, verify the gloss meter’s performance by measuring the reference standards to confirm accuracy.

Documentation:

  • Keep detailed records of the calibration process, including dates, results, and any adjustments made, as per GAO Tek’s guidelines.