| Applicable Fiber |
SM (G.652), MM (G.651), DS (G.653), NZDS (G.655), others (including G.657) |
| Diameter Of Cladding |
80 μm to 150 μm |
| Diameter Of Coating |
160 μm to 900μm |
| Typical Splice Loss |
SM:0.02 dB, MM:0.01 dB, DS:0.04 dB, NZDS:0.04 dB |
| Return Loss |
>60 db |
| Fiber Cleaved Length |
10 mm to 16mm (coating diameter< 250μm), 16mm (coating diameter: 250 μm to 1000μm) |
| Splicing Program |
40 groups |
| Operate Mode |
Manual, Automatic |
| Auto-Heating |
Available |
| Typical Splicing Time |
6 seconds |
| Tube Heating Time |
20 seconds for 60mm and 40mm shrinkable sleeves |
| Fiber View Magnification |
250 X (X or Y view), 125X (X and Y view) |
| Viewing Method And Display |
2 CMOS cameras, 4.3-inch color LCD monitor |
| Storage Of Splice Result |
4000 results |
| Loss Evaluation |
Available |
| Tension Test |
1.8 N to 2.2N |
| Interface |
GUI menu interface, easier operation |
| Battery Ccapacity |
5200 mAh Li-battery, typical 250 cycles (splice and tube heat) |
| Power Supply |
Adaptor, input: AC100 V to 240 V (50/60 HZ), output: DC11 V to 13.5 V |
| Electrode Life |
More than 4000 ARC discharges, can be replaced conveniently |
| Terminals |
USB 2.0 port, for uploading splice results and upgrading software |
| Operating Condition |
Altitude: 0 m to 5000 m, Humidity: 0-95%, Temperature: 14°F to 122°F (-10℃ to +50℃); Wind speed: max 15m/s |
| Dimension |
6.3 in x 5.35 in x 5.51 in (16 cm x 13.6 cm x 14 cm) |
| Weight |
4.63 lbs (2.10kg including battery) |
