Description
Overview
GAOTek is a digital oscilloscope with a 100MHz bandwidth. It offers four analog input channels for simultaneous signal analysis. The oscilloscope features a clear display screen, typically around 7 inches or more, and provides a reliable sampling rate for accurate waveform capture. With various triggering options, it is suitable for a wide range of applications requiring precise measurement and analysis in electronics and electrical engineering tasks.
Features
- Over 14 types of trigger functions: edge, overtime, pulse, pattern, interval, etc
- 100MHz bandwidth, minimum range 500 μV/div, 1 GS/s sample rate
- Support a variety of SCPI remote control command
- 4 channel oscilloscopes + EXT + DVM + auto range function
- Build-in 25MHz arbitrary waveform generator
- Support optional: RS232, LAN, HDMI, touch screen, WIFI, and storage
- Over 32 types of the auto measurement function
- Decode Type: I2C
Technical Specifications
| Waveform Interpolation | (Sin x)/x |
| Sample Rate Range | 1 GS/s |
| Sample Rate and
Delay Time Accuracy |
± 50 ppm |
| AD Converter | 8-bit resolution |
| Record Length | Maximum 64 K samples per single-channel; |
| SEC/DIV Range | 2 ns/div to 100 s/div |
| VOLTS/DIV Range | 500 μV/div to 10 V/div at input BNC |
| Delta Time Measurement Accuracy
(Full Bandwidth) |
Single-shot, Normal mode
± (1 sample interval +100 ppm × reading + 0.6 ns) > 16 averages ± (1 sample interval + 100 ppm × reading + 0.4 ns) Sample interval = s/div ÷ 200 |
| Selectable Analog Bandwidth Limit, typical | 20 MHz |
| Acquisition Rate, typical | Up to 2000 waveforms per second per channel (Normal acquisition mode, no measurement) |
| Low Frequency Response (-3 db) | ≤ 10 Hz at BNC |
| DC Gain Accuracy | ± 3 % for Normal or Average acquisition mode, 10 V/div to 10 mV/div
± 4 % for Normal or Average acquisition mode, 5 mV/div to 500 μV/div |
| Acquisition Modes | Normal, Peak Detect, Average and HR |