Description
Features
- 200 100 or 60 MHz bandwidth
- 1 GSa/s Real Time sample rate
- Large 7 in (17.78 cm) color display, WVGA (800-pixel x 480 pixels)
- Record length up to 1 M
- Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
- USB host and device connectivity, standard
- Multiple automatic measurements
- Four math functions, including FFTs standard
- VGA Optional
Technical Specifications
| Sampling Rate Range | Max. 1 GS/s | |
| Waveform Interpolation | (Sin x) /x | |
| Memory Depth | Single-channel: maximum 1 M; Dual-channel: maximum 512 K (4 K, 16 K, 40 K optional) |
|
| SEC or DIV Range | 2 ns/div to 40 s/div 4 ns/div to 40 s/div |
|
| Sampling Rate and Delay Time Accuracy | ±50 ppm over any ≥1 ms time interval | |
| Delta Time Measurement Accuracy (full bandwidth) | Single-shot, Normal mode: ± (1 sample interval +100 ppm × reading + 0.6 ns) | |
| > 16 times above average (1 sampling interval + 100 ppm × readings + 0.4 ns) | ||
| Sampling interval = SEC/DIV ÷ 200 | ||
| A or D Converter | 8-bit resolution, each channel sampled simultaneously | |
| VOLTS or DIV Range | 2 mV/div to 5 V/div at input BNC | |
| Position Range | ±400 mV (2 mV/div to 20 mV/div) | |
| ±2 V (50 mV/div to 200 mV/div) | ||
| ±4 V (500 mV/div to 2 V/div) | ||
| ±50 V (5 V/div) | ||
| Bandwidth Limit (Typical) | 20 MHz | |
| Low-Frequency Response | ≤10 Hz at output BNC (-3 dB) | |
| Vertical Gain Accuracy | 3 % for sample or average acquisition mode, 5V/div to 10mV/div; | |
| 4 % for sample or average acquisition mode, 5mV/div to 2mV/div | ||
| Trigger Types | Edge, Video, Pulse, Slope, Over time, Alternative, Code-type, Duration, Queue, Repeat | |
| Trigger Source | CH1, CH2, EXT, EXT or 5, AC Line | |
| Input Coupling | DC, AC or GND | |
| Input Impedance, DC Coupling | 1 MΩ 2 % for 20 pF3 pF | |
| Probe Attenuation | 1 X, 10 X | |
| Support Probe Attenuation Coefficients | 1 X, 10 X, 100 X, 1000 X | |
| Math | +, -, x, ÷, FFT | |
| Cursors Measurement | The voltage difference between cursors: delt V Time difference between cursors: delt T Reciprocal of delta T in Hertz (1/ delta T) |
|
| Automatic Measurements | Frequency, Period, Mean, Peak-to-peak, Cycle RMS, Minimum, Maximum, Rise Time, Fall Time, Positive Width, Negative Width | |
| Sampled Channels | 16 (divided into 2 groups) | |
| Max. Input Impedance | 200 K (C = 10 p) | |
| Input Voltage Range | -60 V to 60 V | |
| Logic Threshold Range | -8 V to 8 V | |
| Max. Sample Rate | 500 MHz | |
| Compatible Input | TTL, CMOS, ECL | |
| Sample Depth | 512 k Sample | |
| Cursors | The difference between voltage cursors V; The difference between time cursors T; 1/T is calculated by Hz. |
|
| Measurement | Period and Frequency | |
| Display | 7 in (17.78 cm) TFT 16 K Color LCD, 800 pixels x 480 pixels dots | |
| Dimension | 12.32 in x 5.59 in x 4.25 in (313 mm x 142 mm x 108 mm) | |
| Weight | 4.58 lb (2.08 kg) | |