Description
Features
- 200 MHz or 100 MHz or 60 MHz bandwidth
- 1 GSa/s Real Time sample rate
- Large 7 in (17.78 cm) color display, WVGA (800-pixel x 480 pixel)
- Record length up to 3.21 ft (1 m)
- Trigger mode: edge or pulse width or line selectable video or slop or overtime etc.
- USB host and device connectivity, standard
- Multiple automatic measurements
- Four math functions, including FFTs standard
Technical Specifications
| Sample Rate | Real-Time Sample: 1 GS/s |
| Normal | Normal data only |
| Peak Detect | High-frequency and random glitch capture |
| Average | Waveform Average, selectable 4,8,16,32,64,128 |
| Inputs Coupling | AC, DC, GND |
| Inputs Impendence | 1 MΩ ±2% or 20 pF ±3 pF |
| Probe Attenuation | 1 X, 10 X |
| Supported Probe Attenuation Factor | 1 X, 10 X, 100 X, 1000 X |
| Sample Rate Range | 500 MS/s to 1 GS/s |
| Waveform Interpolation | (Sin x)/x |
| Record Length | 3.21 ft (1 m) |
| Sample Rate and Delay Time Accuracy |
±50 ppm (at over any ≥1 ms time interval) |
| Position Range | 2 ns/div to 8 ns/div; (-8div x s/div) to 20ms;20 ns/div to 80 us/div; (-8 div x s/div) to 40 ms; 200 us/div to 40 s/div; (-8div x s/div) to 400 s; |
| Delta Time Measurement Accuracy (Full Bandwidth) |
Single-shot, Normal mode: ± (1 sample interval +100 ppm × reading + 0.6 ns); >16 averages: ± (1 sample interval + 100 ppm × reading + 0.4 ns); Sample interval = s/div ÷ 200 |
| Vertical Resolution | 8-bit resolution, all channel sampled simultaneously |
| Position Range | 2 mV/div to 10 V/div |
| Bandwidth | 200 MHz or 100 MHz or 60 MHz |
| Rise Time at BNC (Typical) | 1.8 ns or 3.5ns or 5.8ns |
| Math | +, -, *, /, FFT |
| FFT | Windows:Â Hanning, Flattop, Rectangular, Bartlett, Blackman;Â 1024 sample point |
| Bandwidth Limit | 20 MHz |
| Low Frequency Response (-3db) | ≤10 Hz at BNC |
| DC Gain Accuracy | ± 3% for Normal or Average acquisition mode, 10 V/div to 10 mV/div; ± 4% for Normal or Average acquisition mode, 5 mV/div to 2 mV/div |
| DC Measurement Accuracy, Average Acquisition Mode |
When zero, and N ≥16: ± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected; When not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2 mV/div to 200 mV/div; add 50 mV for settings from 200 mV/div to 10 V/div |
| Volts Measurement Repeatability, Average Acquisition Mode |
Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions |
| Display Type | 7 in (17.78 cm) 64 K color TFT (diagonal liquid crystal) |
| Display Resolution | 800 horizontals by 480 vertical pixels |
| Display Contrast | Adjustable (16 gears) with the progress bar |
| Output Voltage(typical) | About 5 Vpp into ≥1 MΩ load |
| Frequency(typical) | 1 kHz |
| Supply Voltage | 100 VARMS to 120 VACRMS (± 10%), 45 Hz to 440 Hz, CATⅡ 120 VACRMS to 240 VACRMS (± 10%), 45 Hz to 66 Hz, CATⅡ |
| Power Consumption | <30 W |
| Fuse | 2 A, T rating, 250 V |
| Temperature | Operating: 32° F to 122° F (0° C to 50° C); Non-operating: -40° F to 159.8° F (-40° C to +71° C) |
| Cooling Method | Convection |
| Humidity | +104° F or below (+40° C or below): ≤90% relative humidity; 106° F to 122° F (+41° C to 50° C): ≤60% relative humidity |
| Altitude | Operating: Below 1.86 mi (3,000 m); Nonoperating: Below 9.32 mi (15,000 m) |
| Size | 15.15 in x 7.84 in x 9.64 in (385 mm x 200 mm x 245 mm) |
| Weight | 4.58 lb (2.08 kg) |