Conductivity Controller with TDS Measuring (Temp. Alarm)



Key Features

  • Economical online conductivity controller contains TDS measurement mode.
  •  1 to 3 points calibration with automatic calibration solution recognition.
  •  Selectable cell constant, temperature coefficient and TDS conversion factor.
  •  Automatic Temperature Compensation ensures accurate reading.
  •  Low and high alarm limits can be set by user and automatically activate an external device.
  • 4 to 20mA output signal meets industry standard.
  •  Manual temperature calibration improves the measurement accuracy of meter.
  •  Selectable temperature unit (°C or °F) for different application requirements.
  • System menu allows setting the 9 parameters, including the number of calibration points,
    cell constant, alarm limits, hysteresis value, etc.
  •  Reset feature automatically resumes all settings back to factory default settings.

Technical Specifications

Range 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
Accuracy ±1% F.S
Resolution 0.01, 0.1, 1
Calibration Points 1 to 3 points
Calibration Solutions 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm
Range 0~100ppt (Max. 200ppt, depending on factor setting)
Accuracy ±1% F.S
TDS Factor 0.1~1.0 (Default 0.5)
Range 0~100°C, 32~212°F
Accuracy ±1°C
Resolution 0.1°C
Signal Output 4~20mA
Load Max. 500Ω
Low and high alarm limits 0.02uS/cm~20.0mS/cm, Selectable
Communication Interface RS485
Connection Terminals Detachable screw terminals
Temperature Compensation 0~100°C, 32~212°F, Automatic
Temperature Coefficient 0.0~10.0%/°C
Cell Constant K=0.1, 1, 10
Normalization Temperature 25°C
Environmental Conditions 0~60°C, 32~140°F
Power Requirements DC24V
Dimensions 3.78in x 3.78in x 2.92in


Weight  0.77lbs  (350g)


There are no reviews yet.

Be the first to review “Conductivity Controller with TDS Measuring (Temp. Alarm)”

Your email address will not be published. Required fields are marked *