GAOTek Fiber Detector

GAOTek fiber detectors are handheld Optical Fiber Identifiers designed for optical fiber installation and maintenance.

GAOTek-FIDS-134

Description

Overview

GAOTek fiber detectors are handheld Optical Fiber Identifiers designed for optical fiber installation and maintenance. They combine OFIs with VFLs into one tester. They can not only identify the optical fibers but also be used as visual fault locators. Their appearances are simple and small. They are easy to carry for the operators.

 

Features

  • Support to detect optical signals without disrupting traffic; based on non-destructive technology
  • Indicate the signal direction in fiber
  • Detect a variety of optical tones, 270 Hz, 1 kHz and 2 kHz
  • Suitable for 0.25 mm, 0.9 mm, 3.0 mm fiber, and no need to replace the clamp block, more convenient than others
  • Build in visible fault locator 1 mW or 10 mW optional
  • Battery low indication
  • Powered by 2 units of 1.5 V AA alkaline batteries

 

Technical Specification

Wavelength Range 900 nm to 1700 nm (SM)
Recognizable signal type CW, 2 kHz, 1 kHz, 270 Hz ±10%
Detector Type InGaAs 2 pcs
Fiber Type 0.9 mm, 0.25 mm, 3 mm fiber
Sensitivity  +10 dB to –20 dBm (Continuous Wave)+10 dB to –15 dBm (Modulated Signal)

+10 dB to –30 dBm (Continuous Wave)

+10 dB to –25 dBm (Modulated Signal)

LED Indicator Signal direction and signal frequency (2 kHz or 1 kHz or 270 Hz) and low battery
Signal intensity 0 to 40
Storage Temperature -4 ℉ to 158 ℉ (-20 ℃ to +70 ℃)
Operating Temperature 14 ℉ to 140 ℉ (-10 ℃ to +60 ℃)
Relative Humidity <95%
Power Supply AA x 2
Size 9.05 in x 1.77 in x 1.77 in (230 mm x 45 mm x 45 mm)
Weight About 0.44 lb (200 g)

Reviews

There are no reviews yet.

Be the first to review “GAOTek Fiber Detector”

Your email address will not be published. Required fields are marked *

Content missing