GAOTek Handheld LCR Meter Digital Bridge Capacitance Inductance Resistance

This LCR Meter measures and identifies frequency up to 100 kHz with DC resistance, an USB device and automatic power-off time, SCPI support & more.




  • Measurable frequency up to 100 kHz continuously adjustable at a step of 1 Hz
  • Measurement of DC resistance and electrolytic capacitor supported
  • Internal bias voltage output (0 mV to 500 mV)
  • Automatic identification of measured component
  • Support for screening and deviation measurement
  • USB communication interface
  • Power supply by high-capacity lithium battery
  • Support for SCPI protocol
  • Manual and automatic range
  • Multiple testing ports
  • Open circuit and short circuit calibration


Technical Specifications

Testing Frequency 100 Hz, 120 Hz, 1 KHz, 10 KHz, 40 kHz, 100 KHz
Basic Accuracy 0.2 %
Number of Display Digits Principal parameter: 5 digits

Secondary parameter: 5 digits

Measured Parameter: Principal parameter: L/C/R/Z

Secondary parameter: X/D/Q/θ/ESR

Measurement Range L:0.000 µH to 2000 H,

C:0.000 pF to 20.000 mF,

R:0.0001 Ω to 20.000 mΩ

Measuring Display Speed  1 time/s (slow), 2 times/s (medium), 4 time/s (fast)
Internal Bias 0 mV to 500mV adjustable, at a step of 1mV.
Calibration Function Open circuit calibration, short circuit calibration
Screening Function The limit range of screening can be set to 1 % to 50 %,

and the fixed points are 1 %, 5 %, 10 % and 20 %.

Deviation Measurement Used for comparing and displaying deviation percentage of component and the set nominal value
Others Adjustment of backlight brightness, Chinese and English, USB device and automatic power-off time


There are no reviews yet.

Be the first to review “GAOTek Handheld LCR Meter Digital Bridge Capacitance Inductance Resistance”

Your email address will not be published. Required fields are marked *

Content missing