GAOTek Networks Cable Qualification Tester

GAOTek Networks Cable Qualification Tester is a multifunctional tester for all home cabling media that troubleshoots all coax, data, and voice wiring.




GAOTek Networks Cable Qualification Tester is a multifunctional tester for all home cabling media that troubleshoots all coax, data, and voice wiring. See network infrastructure problems quickly. Isolate cabling problems from network problems. Save time and money by escalating fewer trouble tickets. See existing cabling bandwidth. A four-second test quickly determines if your existing cabling can support voice or 10 or 100, VoIP or Gigabit Ethernet. Troubleshoot cabling performance faults. Determine why the existing cabling plant cannot support the desired network speed (e.g., connection fault at 7 feet). Free up to 10 % or more of your switch ports. Discover what is at the far end of any cable, whether it is an open cable, a PC, an analog phone, or switch. Detect speed/duplex mismatches in a matter of seconds. Determine a PC’s duplex settings and compare settings to the connected switch – all from one location. Isolating faults easier with intelligent wiremap. Test for wiremap, length, shorts, split pairs or opens, and graphically see the distance to specific pin faults, such as “pin 1 break at 37 feet.” Locate cables and wires with superior accuracy. Breakthrough IntelliTone™ digital signaling technology precisely locates cables in even the most chaotic wiring closet. Empower frontline techs with an easy-to-use tool. Intuitive user interface and graphical display guides users with little or no training required. Avoid disputes over cause of network problems. Save results or upload them to a PC with Cable IQ Reporter Software (included).



  • Works on live networks to provide Ethernet switch detection and device configuration
  • Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
  • Advanced troubleshooting diagnostics
  • Core troubleshooting features
  • Tests all copper cabling media
  • Locate and trace cables with digital toning technology


Technical Specification

Cable Types Supported UTP, STP, FTP, SSTP, RG6, RG59, audio and security
Qualification Auto-Tests 1000 BASE-T, 100 BASE-TX, 10 BASE-T, VoIP, 1394 b S100, TELCO, Wiremap only, Coax
Supported Tests Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog
telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection.
Wiremap Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire
length to breaks. Detects split pairs.
Find Fault Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of
large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application
Results Storage Up to 250 qualification test results
Power Battery type: 4 AA (NEDA 15 A, IEC LR6) alkaline batteries
Battery Life 20 hours of typical use, without backlight
Other Battery Types Supported 4 AA photo lithium, NIHM, NICAD
Dimensions and Weight 7 in x 3.5 in x 1.75 in (17.8 cm x 8.9 cm x 4.5 cm)1.2 lb (0.55 kg)


There are no reviews yet.

Be the first to review “GAOTek Networks Cable Qualification Tester”

Your email address will not be published. Required fields are marked *

Content missing