GAOTek Scanning Lidar Sensor

GAOTek scanning lidar sensor operates on the principle of time of flight (TOF) measurement. At a very high synchronous clock, the laser is emitted at even time intervals.

GAOTek-LDS-141

Description

Overview

GAOTek scanning lidar sensor operates on the principle of time of flight (TOF) measurement. At a very high synchronous clock, the laser is emitted at even time intervals. When the laser beam encounters an object, it is reflected back. After the scanning sensor receives the reflected beam, the time difference at between the transmitting and receiving is used to calculate the laser sensor to the object distance.

 

Technical Specification

Detection distance 1.96 in to 196.85 in (0.05 m to 5 m)
Light source Infrared laser (905nm)
Working distance at 10% reflectivity 78.74 in (2 m)
Response time Typical value 50ms
Basic error 1.57 in (40 mm)
Statistical error 1.18 in (30 mm)
Number of channels 64 (inducing 3 detection areas in each channel)
Configuration port 1 (Micro-USB)
Switch input 6 (NPN)
Switch output 4 (3 detection signals, 1 fault signal), single load capacity 100mA
Indicator light 4 (3 detection lights, 1 status light)
Operating Voltage DC 10 to 36 V
Current consumption 60mA typical value (without output load)
Object reflectivity  4% to 1000%
Ambient light intensity Less than 15000 lx
Working environment 14 °F to 122 °F (-10 °C to 50 °C)

Reviews

There are no reviews yet.

Be the first to review “GAOTek Scanning Lidar Sensor”

Your email address will not be published. Required fields are marked *

Content missing