GAOTek Solid Density Meter with Standard Accessories (Alarm) is designed to easily and precisely determine the density of materials (0.0001 g/cm3-99.9999 g/cm3). It provides several measuring methods for porosity materials, such as surface covering method and saturation method. Users can read porosity, total porosity, open pore volume, and density. This high-performance device can be used to automatically judge whether the sample is qualified or not, and prompt alarm. It offers waterproof, dustproof and durable which is high in accuracy, easy to use and maintenance.
- No need to open and close the lid, simple operation, shorter time according to the specification of new materials laboratory.
- Show the percentage composition of mixed samples for researching and developing new materials.
- Apply to powder metallurgy, magnetic materials, ceramics, fireproofing materials, precious metal and so on.
- Automatically judge whether the sample is qualified or not and prompt alarm.
- The function of solution compensation necessary if liquid other than water is used as a medium for measuring.
- The function of setting actual water temperature, measuring medium density, and waterproof medium density.
- The function of setting aerobatic buoyancy compensation and the bound of density.
- Adopt the unicase high-capacity measuring accessories with the transparent injection mold tank, which can resist wear, fall off, and corrosion.
- Adopt the unicase dedicated wind and dust cover, which makes the combination convenient and durable.
- The interface of RS-232C is included. The printer is available to connect PC with printer.
- High accuracy, easy operation, and maintenance.
|Measuring Range||0.0001 g/cm3-99.9999 g/cm3|
|Density Resolution||0.0001 g/cm3|
|Maximum Weight||0.26 lbs (120 g)|
|Minimum Weight||0.001 g|
- Testing board
- 100 g weight
- Wind and dust cover
- A set of measuring grain accessories
- A set of measuring floating body accessories
- Power transformer
Powder Metallurgy, Magnetic Materials, Hard Alloy, Rubber, Plastic, Wire and Cable, Laboratory, Institute of New Materials Researching and Testing.Field of quality management, cost control, formula researching and developing, density test of small products and high-precision products, research of material density.
Measuring Procedure of Hydroelectricity Products:
- Place sample on testing board to measure weight in air, and then press the ENTER button to memory.
- Place sample that did waterproof treatment into the water to measure weight in water, and then press the ENTER button to memory. Density value is displayed.
According to the ASTM D792, ASTM D297, GB/T1033, GB/T2951, JIS K6268, ISO 2781, ISO 1183, GB/T208, JB/T7780 standards etc.
Density resolution is 0.0001 g/cm3. No need to open and close the lip with the unicase aluminum alloy board. It is high precision, convenient, rapid, homogenization. Provide many measuring methods for porosity materials, such as saturation method and surface covering method. Density, open pore volume, total porosity, and porosity can be read. It can be used to automatically judge whether the sample is qualified or not, and prompt alarm. It has the function of top and bottom limitation, measuring the volume abrasion value DIN of rubber, measuring expansible, measuring true density and performance density of the powder, measuring oil content of oil-bearing, and measuring ceramic density and porosity.