Showing 1417–1440 of 3929 results

Show sidebar
Show 12 24 36 All

GAOTek Fiber Optic 18 CH CWDM MUX DEMUX Multiplexer

SKU: GAOTek-MDX-235
GAOTek fiber optic 18 CH CWDM MUX DEMUX multiplexer takes advantage of thin film coating and provides a full range of CWDM from 1270 nm to 1610 nm, and which are equipped with non-flux bonding micro-optics packaging.
Add to quote

GAOTek Fiber Optic 40 Channel Multiplexer

SKU: GAOTek-OMP-236
GAOTek fiber optic 40-channel multiplexers are mainly used for long-haul optical signal transmission, and they are widely used to compensate for single-mode optical fiber dispersion in long-haul DWDM communication systems.
Add to quote

GAOTek Fiber Optic 8 CH EXP MUX DEMUX

SKU: GAOTek-MDX-276
This Fiber Optic 8 CH EXP MUX DEMUX has configuration of 8 channels, a connector type of SC or UPC, and fiber length of 0.0354 in.
Add to quote

GAOTek Fiber Optic Adapter

SKU: GAOTek-CNT-138
The GAOTek Fiber Optic Adapter is used for fast splices, has very good performance and it can greatly reduce the cost of welding at the same time.
Add to quote

GAOTek Fiber Optic Armoured Pigtail

SKU: GAO-FPG-104
This Fiber Optic Armoured Pigtail is designed using stainless steel tube with mini armored protection which supports single mode and multimode fiber.
Add to quote

GAOTek Fiber Optic Assembly MTP Adapters

SKU: GAO-FRA-102
This Fiber Optic Assembly MTP Adapters is used for high-density back plane and Printed Circuit Board (PCB) solutions in data and telecom systems.
Add to quote

GAOTek Fiber Optic Cable Connector

SKU: GAOTek-CNT-108
GAOTek fiber optic cable connector is the only connector in the world that is fully compatible with the SMPTE, ARIB and EBU standards.

GAOTek Fiber Optic Cable Non-armoured Loose Tube Cable

SKU: GAO-FBC-103
This Fiber Optic Cable Non-armoured Loose Tube Cable are designed to provide high fiber counts with flexibility required for most demanding installations and can be used in both indoor and outdoor.
Add to quote

GAOTek Fiber Optic Cable Plenum Rated Indoor/Outdoor

SKU: GAO-FBC-106
This Fiber Optic Cable Plenum Rated Indoor/Outdoor is used in fiber optic cabling installation with pulling eye in the ends and plenum rated jacket material.
Add to quote

GAOTek Fiber Optic Cleavers

SKU: GAOTek-FFS-214
Discover our compact, high-performance fiber cleaver, featuring a blade life exceeding 48,000 cuts with precise splicing work on fibres up to 3mm diameter. 
Add to quote

GAOTek Fiber Optic Connector

SKU: GAOTek-CNT-140
This Fiber Optic Connector was manufactured with high precision, a LC port with the latest quality core and dust-proof made of ceramic.
Add to quote

GAOTek Fiber Optic CWDM

SKU: GAOTek-FTB-103
This fiber optic CWDM offers directivity >45 dB, return loss >45 dB, and maximum power handling of 500 mW.
Add to quote

GAOTek Fiber Optic DVI Converter

SKU: GAOTek-EWIFI-198
GAOTek DVI-I fiber optic extender is a transmitter or receiver kit supporting single-mode LC simplex Fiber extensions up to 12.43 mi (20 km).
Add to quote

GAOTek Fiber Optic DWDM

SKU: GAOTek-DWDM-111
GAOTek fiber optic DWDM module is based on PLC technology.
Add to quote

GAOTek Fiber Optic DWDM

SKU: GAOTek-DWDM-117
GAOTek fiber optic DWDM (Dense Wavelength Division Multiplexer) Mux/Demux Module offers high stable and reliable bandwidth in a cost-effective and compact package.
Add to quote

GAOTek Fiber Optic DWDM

SKU: GAOTek-FTB-112
This Fiber Optic DWDM has a wavelength range of 1270 nm to 1610 nm, 1U 19 Inch Rack Mount design, and low insertion loss of ≤3.5.
Add to quote

GAOTek Fiber Optic DWDM MUX / DEMUX

SKU: GAO-MDS-104
GAOTek fiber optic DWDM MUX / DEMUX module offers high stable and reliable bandwidth in a cost-effective and compact package.
Add to quote

GAOTek Fiber Optic Equipment 100G FTTH QSFP-100G

SKU: GAOTek-QSFP-106
GAOTek Fiber Optic Equipment 100G FTTH QSFP-100G is a high-speed module designed for fiber optic networks, specifically for FTTH applications.
Add to quote

GAOTek Fiber Optic Equipment DWDM

SKU: GAOTek-DWDM-120
GAOTek fiber optic equipment DWDM is a highly integrated compact OTN product. Its single subrack height is 1U and 6U, which can save the area of the computer room, effectively reduce the power consumption, significantly reduce the operation and maintenance costs, and adapt to the green network Environmental protection needs.
Add to quote

GAOTek Fiber Optic Equipment DWDM

SKU: GAOTek-DWDM-158
GAOTek fiber optic equipment DWDM is a single-channel, pluggable, fiber-optic SFP28 transceiver module for 25 G Ethernet and InfiniBand EDR applications.
Add to quote

GAOTek Fiber Optic Equipment Multifunction FTTR MINI OTDR

SKU: GAOTek-OTDR-210
GAOTek Fiber Optic Equipment Multifunction FTTR MINI OTDR is used to measure the length, loss, splice quality, and other parameters of various types of optical fiber and optical cable and is widely used in the fields of engineering construction, line maintenance, and emergency rescue testing of optical fiber to the home, metropolitan networks, and secondary backbone communication systems, as well as in the development and production measurement of optical fiber and optical cable.
Add to quote

GAOTek Fiber Optic Equipment Multiplexer

SKU: GAOTek-OMP-134
GAOTek fiber optic equipment multiplexers are new generations of high-performance enterprise-level routers launched by H3C.
Add to quote

GAOTek Fiber Optic Equipment Multiplexer

SKU: GAOTek-OMP-341
This Fiber Optic Equipment Multiplexer has 1270 nm to 1610 nm wavelength, it has 16 channels configuration, and it has ≤3.5 dB insertion loss.
Add to quote

GAOTek Fiber Optic Equipment Splitter

SKU: GAOTek-SPL-162
This Fiber Optic Equipment Splitter has a power consumption of ≤45 W, connector type of SPF 1000 and power supply of input 100 V to 240 V.
Add to quote
Load more products
Loading...